pwm
pwm应用程序开发
访问 PWM 设备API
应用程序通过 RT-Thread 提供的 PWM 设备管理接口来访问 PWM 设备硬件，相关接口如下所示：
函数 |
描述 |
rt_device_find() |
根据 PWM 设备名称查找设备获取设备句柄 |
rt_pwm_set() |
设置 PWM 周期和脉冲宽度 |
rt_pwm_enable() |
使能 PWM 设备 |
rt_pwm_disable() |
关闭 PWM 设备 |
查找 PWM 设备
应用程序根据 PWM 设备名称获取设备句柄，进而可以操作 PWM 设备，查找设备函数如下所示:
rt_device_t rt_device_find(const char* name);参数 |
描述 |
name |
设备名称 |
返回 |
—— |
设备句柄 |
查找到对应设备将返回相应的设备句柄 |
RT_NULL |
没有找到设备 |
一般情况下，注册到系统的 PWM 设备名称为 pwm0，pwm1等，使用示例如下所示：
#define PWM_DEV_NAME "pwm3" /* PWM 设备名称 */
struct rt_device_pwm *pwm_dev; /* PWM 设备句柄 */
/* 查找设备 */
pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);设置 PWM 周期和脉冲宽度
通过如下函数设置 PWM 周期和占空比：
rt_err_t rt_pwm_set(struct rt_device_pwm *device,
int channel,
rt_uint32_t period,
rt_uint32_t pulse);参数 |
描述 |
device |
PWM 设备句柄 |
channel |
PWM 通道 |
period |
PWM 周期时间 (单位纳秒 ns) |
pulse |
PWM 脉冲宽度时间 (单位纳秒 ns) |
返回 |
—— |
RT_EOK |
成功 |
-RT_EIO |
device 为空 |
-RT_ENOSYS |
设备操作方法为空 |
其他错误码 |
执行失败 |
PWM 的通道 channel 可为正数或者负数。因为有的芯片的PWM是具有互补输出功能的，即PWM的某一个通道是可以靠两个引脚来发出一对互补的波形。当通道号为正数的时候，代表使用PWM的正常输出波形引脚；为其负数的时候，代表使用PWM的互补输出波形引脚。
使用示例如下所示：
#define PWM_DEV_CHANNEL 1 /* PWM通道的CH1引脚 */
#define PWM_DEV_CHANNEL -1 /* PWM通道的CH1N引脚 */PWM 的输出频率由周期时间 period 决定，例如周期时间为 0.5ms (毫秒)，则 period 值为 500000ns（纳秒），输出频率为 2KHz，占空比为 pulse / period，pulse 值不能超过 period。
使用示例如下所示：
#define PWM_DEV_NAME "pwm3" /* PWM设备名称 */
#define PWM_DEV_CHANNEL 4 /* PWM通道 */
struct rt_device_pwm *pwm_dev; /* PWM设备句柄 */
rt_uint32_t period, pulse;
period = 500000; /* 周期为0.5ms，单位为纳秒ns */
pulse = 0; /* PWM脉冲宽度值，单位为纳秒ns */
/* 查找设备 */
pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
/* 设置PWM周期和脉冲宽度 */
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);使能 PWM 设备
设置好 PWM 周期和脉冲宽度后就可以通过如下函数使能 PWM 设备:
rt_err_t rt_pwm_enable(struct rt_device_pwm *device, int channel);参数 |
描述 |
device |
PWM 设备句柄 |
channel |
PWM 通道 -channel代表互补通道 |
返回 |
—— |
RT_EOK |
设备使能成功 |
-RT_ENOSYS |
设备操作方法为空 |
其他错误码 |
设备使能失败 |
[!NOTE] 注：这个函数并不会使能PWM互补输出的两个引脚，只能使能其中的某一个引脚(CHx或者CHxN)。
使用示例如下所示：
#define PWM_DEV_NAME "pwm3" /* PWM设备名称 */
#define PWM_DEV_CHANNEL 4 /* PWM通道 */
struct rt_device_pwm *pwm_dev; /* PWM设备句柄 */
rt_uint32_t period, pulse;
period = 500000; /* 周期为0.5ms，单位为纳秒ns */
pulse = 0; /* PWM脉冲宽度值，单位为纳秒ns */
/* 查找设备 */
pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
/* 设置PWM周期和脉冲宽度 */
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);
/* 使能设备 */
rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);关闭 PWM 设备通道
通过如下函数关闭 PWM 设备对应通道。
rt_err_t rt_pwm_disable(struct rt_device_pwm *device, int channel);参数 |
描述 |
device |
PWM 设备句柄 |
channel |
PWM 通道 |
返回 |
—— |
RT_EOK |
设备关闭成功 |
-RT_EIO |
设备句柄为空 |
其他错误码 |
设备关闭失败 |
[!NOTE] 注：这个函数并不会同时失能PWM互补输出的两个引脚，只能失能其中的某一个引脚(CHx或者CHxN)。
使用示例如下所示：
#define PWM_DEV_NAME "pwm3" /* PWM设备名称 */
#define PWM_DEV_CHANNEL 4 /* PWM通道 */
struct rt_device_pwm *pwm_dev; /* PWM设备句柄 */
rt_uint32_t period, pulse;
period = 500000; /* 周期为0.5ms，单位为纳秒ns */
pulse = 0; /* PWM脉冲宽度值，单位为纳秒ns */
/* 查找设备 */
pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
/* 设置PWM周期和脉冲宽度 */
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);
/* 使能设备 */
rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);
/* 关闭设备通道 */
rt_pwm_disable(pwm_dev,PWM_DEV_CHANNEL);FinSH 命令
设置 PWM 设备的某个通道的周期和占空比可使用命令pwm_set pwm1 1 500000 5000，第一个参数为命令，第二个参数为 PWM 设备名称，第 3 个参数为 PWM 通道，第 4 个参数为周期（单位纳秒），第 5 个参数为脉冲宽度（单位纳秒）。
msh />pwm_set pwm1 1 500000 5000
msh />使能 PWM 设备的某个通道可使用命令pwm_enable pwm1 1，第一个参数为命令，第二个参数为 PWM 设备名称，第 3 个参数为 PWM 通道。
msh />pwm_enable pwm1 1
msh />关闭 PWM 设备的某个通道可使用命令pwm_disable pwm1 1，第一个参数为命令，第二个参数为 PWM 设备名称，第 3 个参数为 PWM 通道。
msh />pwm_disable pwm1 1
msh />PWM 设备使用示例
PWM 设备的具体使用方式可以参考如下示例代码，示例代码的主要步骤如下：
- 查找 PWM 设备获取设备句柄。
- 设置 PWM 周期和脉冲宽度。
- 使能 PWM 设备。
- while 循环里每 50 毫秒修改一次脉冲宽度。
- 将 PWM通道对应引脚和 LED 对应引脚相连，可以看到 LED 不停的由暗变到亮，然后又从亮变到暗。
/*
* 程序清单：这是一个 PWM 设备使用例程
* 例程导出了 pwm_led_sample 命令到控制终端
* 命令调用格式：pwm_led_sample
* 程序功能：通过 PWM 设备控制 LED 灯的亮度，可以看到LED不停的由暗变到亮，然后又从亮变到暗。
*/
#include <rtthread.h>
#include <rtdevice.h>
#define PWM_DEV_NAME "pwm3" /* PWM设备名称 */
#define PWM_DEV_CHANNEL 4 /* PWM通道 */
struct rt_device_pwm *pwm_dev; /* PWM设备句柄 */
static int pwm_led_sample(int argc, char *argv[])
{
rt_uint32_t period, pulse, dir;
period = 500000; /* 周期为0.5ms，单位为纳秒ns */
dir = 1; /* PWM脉冲宽度值的增减方向 */
pulse = 0; /* PWM脉冲宽度值，单位为纳秒ns */
/* 查找设备 */
pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
if (pwm_dev == RT_NULL)
{
rt_kprintf("pwm sample run failed! can't find %s device!\n", PWM_DEV_NAME);
return RT_ERROR;
}
/* 设置PWM周期和脉冲宽度默认值 */
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);
/* 使能设备 */
rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);
while (1)
{
rt_thread_mdelay(50);
if (dir)
{
pulse += 5000; /* 从0值开始每次增加5000ns */
}
else
{
pulse -= 5000; /* 从最大值开始每次减少5000ns */
}
if (pulse >= period)
{
dir = 0;
}
if (0 == pulse)
{
dir = 1;
}
/* 设置PWM周期和脉冲宽度 */
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);
}
}
/* 导出到 msh 命令列表中 */
MSH_CMD_EXPORT(pwm_led_sample, pwm sample);pwm驱动框架分析
- pwm 驱动框架仅仅需要注册一个控制函数即可
- pwm驱动根据命令的类型实现pwm控制
pwm 功能：
1.pwm 开启和关闭
2.设置pwm的周期和占空比
3.设置pwm的死区时间
4.设置pwm的相位
5.pwm互补输出相关drv_pwm.h分析
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-05-07 aozima the first version
* 2022-09-24 yuqi add phase and dead time configuration
*/
#ifndef __DRV_PWM_H_INCLUDE__
#define __DRV_PWM_H_INCLUDE__
#include <rtthread.h>
//pwm 使能和关闭
#define PWM_CMD_ENABLE (RT_DEVICE_CTRL_BASE(PWM) + 0)
#define PWM_CMD_DISABLE (RT_DEVICE_CTRL_BASE(PWM) + 1)
//
#define PWM_CMD_SET (RT_DEVICE_CTRL_BASE(PWM) + 2)
#define PWM_CMD_GET (RT_DEVICE_CTRL_BASE(PWM) + 3)
//pwm互补使能和关闭
#define PWMN_CMD_ENABLE (RT_DEVICE_CTRL_BASE(PWM) + 4)
#define PWMN_CMD_DISABLE (RT_DEVICE_CTRL_BASE(PWM) + 5)
//设置周期和占空比
#define PWM_CMD_SET_PERIOD (RT_DEVICE_CTRL_BASE(PWM) + 6)
#define PWM_CMD_SET_PULSE (RT_DEVICE_CTRL_BASE(PWM) + 7)
//设置死区时间
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
//设置相位
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
//pwm 中断开启和关闭
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
struct rt_pwm_configuration
{
rt_uint32_t channel; /* 通道 0 ~ n or 0 ~ -n, which depends on specific MCU requirements */
rt_uint32_t period; /* 周期 单位是 unit:ns 1ns~4.29s:1Ghz~0.23hz */
rt_uint32_t pulse; /* 占空比 unit:ns (pulse<=period) */
rt_uint32_t dead_time; /* 死区时间 unit:ns */
rt_uint32_t phase; /*unit: 相位 degree, 0~360, which is the phase of pwm output, */
/*
* RT_TRUE : The channel of pwm is complememtary.
* RT_FALSE : The channel of pwm is nomal.
*/
rt_bool_t complementary;//互补输出使能
};
struct rt_device_pwm;
/*
cmd 命令类型
arg 参数
*/
struct rt_pwm_ops
{
rt_err_t (*control)(struct rt_device_pwm *device, int cmd, void *arg);
};
//pwm 驱动抽象模型
struct rt_device_pwm
{
struct rt_device parent;
const struct rt_pwm_ops *ops;
};
//pwm驱动注册函数
rt_err_t rt_device_pwm_register(struct rt_device_pwm *device, const char *name, const struct rt_pwm_ops *ops, const void *user_data);
/*
pwm 功能：
1.pwm 开启和关闭
2.设置pwm的周期和占空比
3.设置pwm的死区时间
4.设置pwm的相位
*/
rt_err_t rt_pwm_enable(struct rt_device_pwm *device, int channel);
rt_err_t rt_pwm_disable(struct rt_device_pwm *device, int channel);
rt_err_t rt_pwm_set(struct rt_device_pwm *device, int channel, rt_uint32_t period, rt_uint32_t pulse);
rt_err_t rt_pwm_set_period(struct rt_device_pwm *device, int channel, rt_uint32_t period);
rt_err_t rt_pwm_set_pulse(struct rt_device_pwm *device, int channel, rt_uint32_t pulse);
rt_err_t rt_pwm_set_dead_time(struct rt_device_pwm *device, int channel, rt_uint32_t dead_time);
rt_err_t rt_pwm_set_phase(struct rt_device_pwm *device, int channel, rt_uint32_t phase);
#endif /* __DRV_PWM_H_INCLUDE__ */pwm 函数调用流程
函数的调用流程就是从上到下的调用
编写pwm驱动
时钟
KCONFIG 配置
board 文件夹下的 KCONFIG 配置
menuconfig BSP_USING_PWM
bool "Enable PWM BUS"
default n
select RT_USING_PWM
if BSP_USING_PWM
config BSP_USING_PWM1
bool "Enable PWM1 BUS"
default n
config BSP_USING_PWM2
bool "Enable PWM2 BUS"
default n
config BSP_USING_PWM3
bool "Enable PWM3 BUS"
default n
endif修改完成以后menuconfig出现pwm配置选项
添加drv_pwm.c 和drv_pwm.h
这2个文件参考自stm32的pwm驱动函数
修改libraries\n32_drivers\SConscript文件增加drv_pwm.c的编译
if GetDepend(['RT_USING_PWM']):
src += ['drv_pwm.c']
自己实现pwm驱动
由于N32L406系列官方的bsp没得陪我们驱动，我就自己实现一个
drv_pwm.h
这个主要是一个配置文件，配置每个pwm通道的变量
/*
* Copyright (c) 2006-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2022-10-19 Nations first version
*/
#ifndef __DRV_PWM_H__
#define __DRV_PWM_H__
#include <rthw.h>
#include <rtthread.h>
#include "board.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifdef BSP_USING_PWM1
#define PWM1_CONFIG\
{\
.tim =TIM9,\
.channel =0,\
.gpio_grp =GPIOB,\
.pin =GPIO_PIN_12,\
.prescaler =32-1, \
.gpio_af =GPIO_AF1_TIM9, \
.name ="pwm0",\
}
#endif
#ifdef BSP_USING_PWM2
#define PWM2_CONFIG \
{ \
.tim =TIM9, \
.channel =1, \
.gpio_grp =GPIOB, \
.pin =GPIO_PIN_13, \
.prescaler =32-1, \
.gpio_af =GPIO_AF1_TIM9, \
.name ="pwm1", \
}
#endif /* BSP_USING_PWM2 */
#ifdef BSP_USING_PWM3
#define PWM2_CONFIG \
{ \
.tim =TIM9, \
.channel =2, \
.gpio_grp =GPIOB, \
.pin =GPIO_PIN_14, \
.prescaler =32-1, \
.gpio_af =GPIO_AF1_TIM9, \
.name ="pwm2", \
}
#endif /* BSP_USING_PWM3 */
#ifdef __cplusplus
}
#endif
#endif /* __DRV_PWM_H__ */drv_pwm.c
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-12-13 zylx first version
* 2021-01-23 thread-liu Fix the timer clock frequency doubling problem
*/
#include <board.h>
#include <rtconfig.h>
#include <rtconfig.h>
#include <drivers/rt_drv_pwm.h>
#include <drv_pwm.h>
#include "n32l40x_tim.h"
#include "n32l40x_rcc.h"
#ifdef BSP_USING_PWM
#ifdef PWM_DEBUG
#define LOG_E rt_kprintf
#define LOG_D LOG_E
#else
int printf_log(const char * fmt,...) {;}
#define LOG_E printf_log
#define LOG_D LOG_E
#endif
struct n32_pwm
{
struct rt_device_pwm pwm_device;//设备驱动框架的pwm对象
TIM_Module *tim;//定时器指针
rt_uint16_t channel;//定时器通道
GPIO_Module* gpio_grp;//pwm 使用的gpio分组
uint16_t pin;//pwm 使用的gpio pin
uint16_t prescaler; //定时器预分频系数
uint8_t gpio_af;//引脚复用功能
char *name;//pwm名字也是驱动的名字
};
static struct n32_pwm n32_pwm_obj[] =
{
#ifdef BSP_USING_PWM1
PWM1_CONFIG,
#endif
#ifdef BSP_USING_PWM2
PWM2_CONFIG,
#endif
#ifdef BSP_USING_PWM3
PWM3_CONFIG,
#endif
#ifdef BSP_USING_PWM4
PWM4_CONFIG,
#endif
#ifdef BSP_USING_PWM5
PWM5_CONFIG,
#endif
#ifdef BSP_USING_PWM6
PWM6_CONFIG,
#endif
#ifdef BSP_USING_PWM7
PWM7_CONFIG,
#endif
#ifdef BSP_USING_PWM8
PWM8_CONFIG,
#endif
#ifdef BSP_USING_PWM9
PWM9_CONFIG,
#endif
#ifdef BSP_USING_PWM10
PWM10_CONFIG,
#endif
#ifdef BSP_USING_PWM11
PWM11_CONFIG,
#endif
#ifdef BSP_USING_PWM12
PWM12_CONFIG,
#endif
#ifdef BSP_USING_PWM13
PWM13_CONFIG,
#endif
#ifdef BSP_USING_PWM14
PWM14_CONFIG,
#endif
#ifdef BSP_USING_PWM15
PWM15_CONFIG,
#endif
#ifdef BSP_USING_PWM16
PWM16_CONFIG,
#endif
#ifdef BSP_USING_PWM17
PWM17_CONFIG,
#endif
};
static rt_uint64_t tim_clock_get(TIM_Module *htim)
{
RCC_ClocksType RCC_Clocks;
RCC_GetClocksFreqValue(&RCC_Clocks);
LOG_D("%s %d \r\n",__FUNCTION__,__LINE__);
if(htim==TIM1||htim==TIM8)
{
return RCC_Clocks.Pclk2Freq;
}
else
{
return RCC_Clocks.Pclk1Freq;
}
return 0;
}
//输出使能控制
static rt_err_t drv_pwm_enable(TIM_Module *time, struct rt_pwm_configuration *configuration, rt_bool_t enable)
{
/* Converts the channel number to the channel number of Hal library */
LOG_D("%s %d ch = %d \r\n",__FUNCTION__,__LINE__,configuration->channel);
int x=0;
if(enable)
{
x= (0x01<<(4*configuration->channel));
time->CCEN |=(0x01<<(4*configuration->channel));
}
else
{
x= ~(0x01<<(4*configuration->channel));
time->CCEN &= ~(0x01<<(4*configuration->channel));
}
LOG_D("%s %d CCEN = %x x = %x\r\n",__FUNCTION__,__LINE__,time->CCEN,x);
return RT_EOK;
}
//互补输出使能控制
static rt_err_t drv_pwmn_enable(TIM_Module *time, struct rt_pwm_configuration *configuration, rt_bool_t enable)
{
/* Converts the channel number to the channel number of Hal library */
(void)enable;
LOG_D("%s %d ch=%d\r\n",__FUNCTION__,__LINE__,configuration->channel);
if(TIM1==time || TIM8==time)
{
if(enable)
{
time->CCEN |=(0x02<<(4*configuration->channel));
}
else
{
time->CCEN &= !(0x02<<(4*configuration->channel));
}
}
return RT_EOK;
}
static rt_err_t drv_pwm_get(TIM_Module *htim, struct rt_pwm_configuration *configuration)
{
LOG_D("%s %d \r\n",__FUNCTION__,__LINE__);
configuration->period = TIM_GetAutoReload(htim);
switch(configuration->channel)
{
case 0:
configuration->pulse =TIM_GetCap1(htim);
break;
case 1:
configuration->pulse =TIM_GetCap2(htim);
break;
case 2:
configuration->pulse =TIM_GetCap3(htim);
break;
case 3:
configuration->pulse =TIM_GetCap4(htim);
break;
default:
configuration->pulse =0;
break;
}
return RT_EOK;
}
static rt_err_t drv_pwm_set(TIM_Module *htim, struct rt_pwm_configuration *configuration)
{
LOG_D("%s %d ch=%d\r\n",__FUNCTION__,__LINE__,configuration->channel);
TIM_SetAutoReload(htim,configuration->period);
switch(configuration->channel)
{
case 0:
TIM_SetCmp1(htim,configuration->pulse);
break;
case 1:
TIM_SetCmp2(htim,configuration->pulse);
break;
case 2:
TIM_SetCmp3(htim,configuration->pulse);
break;
case 3:
TIM_SetCmp4(htim,configuration->pulse);
break;
default:
configuration->pulse =0;
break;
}
return RT_EOK;
}
static rt_err_t drv_pwm_set_period(TIM_Module *htim, struct rt_pwm_configuration *configuration)
{
LOG_D("%s %d \r\n",__FUNCTION__,__LINE__);
TIM_SetAutoReload(htim,configuration->period);
return RT_EOK;
}
static rt_err_t drv_pwm_set_pulse(TIM_Module *htim, struct rt_pwm_configuration *configuration)
{
// LOG_D("%s %d \r\n",__FUNCTION__,__LINE__);
switch(configuration->channel)
{
case 0:
TIM_SetCmp1(htim,configuration->pulse);
LOG_D("%s %d TIM_SetCmp1 \r\n",__FUNCTION__,__LINE__);
break;
case 1:
TIM_SetCmp2(htim,configuration->pulse);
break;
case 2:
TIM_SetCmp3(htim,configuration->pulse);
break;
case 3:
TIM_SetCmp4(htim,configuration->pulse);
break;
default:
configuration->pulse =0;
break;
}
return RT_EOK;
}
static rt_err_t drv_pwm_control(struct rt_device_pwm *device, int cmd, void *arg)
{
struct rt_pwm_configuration *configuration = (struct rt_pwm_configuration *)arg;
struct n32_pwm *pwm = (struct n32_pwm *)device->parent.user_data;
LOG_D("%s %d cmd = %d\r\n",__FUNCTION__,__LINE__,cmd);
switch (cmd)
{
case PWM_CMD_ENABLE:
return drv_pwm_enable(pwm->tim, configuration, RT_TRUE);
case PWM_CMD_DISABLE:
return drv_pwm_enable(pwm->tim, configuration, RT_FALSE);
case PWM_CMD_SET:
return drv_pwm_set(pwm->tim, configuration);
case PWM_CMD_SET_PERIOD:
return drv_pwm_set_period(pwm->tim, configuration);
case PWM_CMD_SET_PULSE:
return drv_pwm_set_pulse(pwm->tim, configuration);
case PWM_CMD_GET:
return drv_pwm_get(pwm->tim, configuration);
default:
return -RT_EINVAL;
}
}
/**
* @brief 配置时钟
*/
static void pwm_time_rcc_config(TIM_Module *htim,GPIO_Module *gpio_grp)
{
LOG_D("%s %d \r\n",__FUNCTION__,__LINE__);
if(TIM1==htim)
{
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_TIM1, ENABLE);
}
else if(TIM2==htim)
{
RCC_EnableAPB1PeriphClk(RCC_APB1_PERIPH_TIM2, ENABLE);
}
else if(TIM3==htim)
{
RCC_EnableAPB1PeriphClk(RCC_APB1_PERIPH_TIM3, ENABLE);
}
else if(TIM4==htim)
{
RCC_EnableAPB1PeriphClk(RCC_APB1_PERIPH_TIM4, ENABLE);
}
else if(TIM5==htim)
{
RCC_EnableAPB1PeriphClk(RCC_APB1_PERIPH_TIM5, ENABLE);
}
else if(TIM6==htim)
{
RCC_EnableAPB1PeriphClk(RCC_APB1_PERIPH_TIM6, ENABLE);
}
else if(TIM7==htim)
{
RCC_EnableAPB1PeriphClk(RCC_APB1_PERIPH_TIM7, ENABLE);
}
else if(TIM8==htim)
{
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_TIM8, ENABLE);
}
else if(TIM9==htim)
{
RCC_EnableAPB1PeriphClk(RCC_APB1_PERIPH_TIM9, ENABLE);
LOG_D("%s %d RCC_EnableAPB1PeriphClk TIM9 \r\n",__FUNCTION__,__LINE__);
}
if(GPIOA==gpio_grp)
{
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOA, ENABLE);
}
else if(GPIOB==gpio_grp)
{
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOB, ENABLE);
LOG_D("%s %d RCC_EnableAPB2PeriphClk GPIOB \r\n",__FUNCTION__,__LINE__);
}
else if(GPIOC==gpio_grp)
{
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOC, ENABLE);
}
else if(GPIOD==gpio_grp)
{
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOD, ENABLE);
}
}
/**
* @brief 配置pwm输出对应的gpio引脚
*/
static void pwm_time_gpio_config(struct n32_pwm *htim)
{
LOG_D("%s %d \r\n",__FUNCTION__,__LINE__);
GPIO_InitType GPIO_InitStructure;
GPIO_InitStruct(&GPIO_InitStructure);
GPIO_InitStructure.Pin = htim->pin;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Current = GPIO_DC_4mA;
GPIO_InitStructure.GPIO_Alternate = htim->gpio_af;
GPIO_InitPeripheral(htim->gpio_grp, &GPIO_InitStructure);
}
static rt_err_t n32_hw_pwm_init(struct n32_pwm *device)
{
LOG_D("%s %d \r\n",__FUNCTION__,__LINE__);
rt_err_t result = RT_EOK;
TIM_TimeBaseInitType TIM_TimeBaseStructure;
OCInitType TIM_OCInitStructure;
RT_ASSERT(device != RT_NULL);
pwm_time_rcc_config(device->tim,device->gpio_grp);
pwm_time_gpio_config(device);
TIM_TimeBaseStructure.Period = 100;
TIM_TimeBaseStructure.Prescaler = device->prescaler;
TIM_TimeBaseStructure.ClkDiv = 0;
TIM_TimeBaseStructure.CntMode = TIM_CNT_MODE_UP;
TIM_InitTimeBase(device->tim, &TIM_TimeBaseStructure);
/* PWM1 Mode configuration: Channel1 */
TIM_OCInitStructure.OcMode = TIM_OCMODE_PWM1;
TIM_OCInitStructure.OutputState = TIM_OUTPUT_STATE_ENABLE;
TIM_OCInitStructure.Pulse = 0;
TIM_OCInitStructure.OcPolarity = TIM_OC_POLARITY_LOW;
switch(device->channel)
{
case 0:
TIM_InitOc1(device->tim, &TIM_OCInitStructure);
TIM_ConfigOc1Preload(device->tim, TIM_OC_PRE_LOAD_ENABLE);
LOG_D("%s %d PWM CH0 CFG\r\n",__FUNCTION__,__LINE__);
break;
case 1:
TIM_InitOc2(device->tim, &TIM_OCInitStructure);
TIM_ConfigOc2Preload(device->tim, TIM_OC_PRE_LOAD_ENABLE);
break;
case 2:
TIM_InitOc3(device->tim, &TIM_OCInitStructure);
TIM_ConfigOc3Preload(device->tim, TIM_OC_PRE_LOAD_ENABLE);
break;
case 3:
TIM_InitOc4(device->tim, &TIM_OCInitStructure);
TIM_ConfigOc4Preload(device->tim, TIM_OC_PRE_LOAD_ENABLE);
break;
default:
break;
}
TIM_ConfigArPreload(device->tim, ENABLE);
TIM_Enable(device->tim, ENABLE);
if( device->tim == TIM1 || device->tim== TIM8 )
{
TIM_EnableCtrlPwmOutputs(device->tim, ENABLE);
}
LOG_D("%s 32_pwm_init", device->name);
return result;
}
static rt_err_t drv_pwm_control(struct rt_device_pwm *device, int cmd, void *arg);
static struct rt_pwm_ops drv_ops =
{
drv_pwm_control
};
static int n32_pwm_init(void)
{
int i = 0;
int result = RT_EOK;
for (i = 0; i < sizeof(n32_pwm_obj) / sizeof(n32_pwm_obj[0]); i++)
{
/* pwm init */
if (n32_hw_pwm_init(&n32_pwm_obj[i]) != RT_EOK)
{
LOG_E("%s init failed", n32_pwm_obj[i].name);
result = -RT_ERROR;
goto __exit;
}
else
{
LOG_D("%s init success", n32_pwm_obj[i].name);
/* register pwm device */
if (rt_device_pwm_register(&n32_pwm_obj[i].pwm_device, n32_pwm_obj[i].name, &drv_ops, n32_pwm_obj+i) == RT_EOK)
{
LOG_D("%s register success", n32_pwm_obj[i].name);
}
else
{
LOG_E("%s register failed", n32_pwm_obj[i].name);
result = -RT_ERROR;
}
}
}
__exit:
return result;
}
INIT_DEVICE_EXPORT(n32_pwm_init);
#endif /* BSP_USING_PWM */pwm 驱动测试
pwm驱动框架提供了pwm测试函数
pwm框架测试函数代码
#ifdef RT_USING_FINSH
#include <stdlib.h>
#include <string.h>
#include <finsh.h>
static int pwm(int argc, char **argv)
{
rt_err_t result = -RT_ERROR;
char *result_str;
static struct rt_device_pwm *pwm_device = RT_NULL;
struct rt_pwm_configuration cfg = {0};
if(argc > 1)
{
if(!strcmp(argv[1], "probe"))
{
if(argc == 3)
{
pwm_device = (struct rt_device_pwm *)rt_device_find(argv[2]);
result_str = (pwm_device == RT_NULL) ? "failure" : "success";
rt_kprintf("probe %s %s\n", argv[2], result_str);
}
else
{
rt_kprintf("pwm probe <device name> - probe pwm by name\n");
}
}
else
{
if(pwm_device == RT_NULL)
{
rt_kprintf("Please using 'pwm probe <device name>' first.\n");
return -RT_ERROR;
}
if(!strcmp(argv[1], "enable"))
{
if(argc == 3)
{
result = rt_pwm_enable(pwm_device, atoi(argv[2]));
result_str = (result == RT_EOK) ? "success" : "failure";
rt_kprintf("%s channel %d is enabled %s \n", pwm_device->parent.parent.name, atoi(argv[2]), result_str);
}
else
{
rt_kprintf("pwm enable <channel> - enable pwm channel\n");
rt_kprintf(" e.g. MSH >pwm enable 1 - PWM_CH1 nomal\n");
rt_kprintf(" e.g. MSH >pwm enable -1 - PWM_CH1N complememtary\n");
}
}
else if(!strcmp(argv[1], "disable"))
{
if(argc == 3)
{
result = rt_pwm_disable(pwm_device, atoi(argv[2]));
}
else
{
rt_kprintf("pwm disable <channel> - disable pwm channel\n");
}
}
else if(!strcmp(argv[1], "get"))
{
cfg.channel = atoi(argv[2]);
result = rt_pwm_get(pwm_device, &cfg);
if(result == RT_EOK)
{
rt_kprintf("Info of device [%s] channel [%d]:\n",pwm_device, atoi(argv[2]));
rt_kprintf("period : %d\n", cfg.period);
rt_kprintf("pulse : %d\n", cfg.pulse);
rt_kprintf("Duty cycle : %d%%\n",(int)(((double)(cfg.pulse)/(cfg.period)) * 100));
}
else
{
rt_kprintf("Get info of device: [%s] error.\n", pwm_device);
}
}
else if (!strcmp(argv[1], "set"))
{
if(argc == 5)
{
result = rt_pwm_set(pwm_device, atoi(argv[2]), atoi(argv[3]), atoi(argv[4]));
rt_kprintf("pwm info set on %s at channel %d\n",pwm_device,(rt_base_t)atoi(argv[2]));
}
else
{
rt_kprintf("Set info of device: [%s] error\n", pwm_device);
rt_kprintf("Usage: pwm set <channel> <period> <pulse>\n");
}
}
else if(!strcmp(argv[1], "phase"))
{
if(argc == 4)
{
result = rt_pwm_set_phase(pwm_device, atoi(argv[2]),atoi(argv[3]));
result_str = (result == RT_EOK) ? "success" : "failure";
rt_kprintf("%s phase is set %d \n", pwm_device->parent.parent.name, (rt_base_t)atoi(argv[3]));
}
}
else if(!strcmp(argv[1], "pulse"))
{
if(argc == 4)
{
result = rt_pwm_set_pulse(pwm_device, atoi(argv[2]),atoi(argv[3]));
result_str = (result == RT_EOK) ? "success" : "failure";
rt_kprintf("%s pulse is set %d \n", pwm_device->parent.parent.name, (rt_base_t)atoi(argv[3]));
}
}
else if(!strcmp(argv[1], "dead_time"))
{
if(argc == 4)
{
result = rt_pwm_set_dead_time(pwm_device, atoi(argv[2]),atoi(argv[3]));
result_str = (result == RT_EOK) ? "success" : "failure";
rt_kprintf("%s dead_time is set %d \n", pwm_device->parent.parent.name, (rt_base_t)atoi(argv[3]));
}
}
else
{
rt_kprintf("Usage: \n");
rt_kprintf("pwm probe <device name> - probe pwm by name\n");
rt_kprintf("pwm enable <channel> - enable pwm channel\n");
rt_kprintf("pwm disable <channel> - disable pwm channel\n");
rt_kprintf("pwm get <channel> - get pwm channel info\n");
rt_kprintf("pwm set <channel> <period> <pulse> - set pwm channel info\n");
rt_kprintf("pwm pulse <channel> <pulse> - set pwm pulse\n");
rt_kprintf("pwm phase <channel> <phase> - set pwm phase\n");
rt_kprintf("pwm dead_time <channel> <dead_time> - set pwm dead time\n");
result = -RT_ERROR;
}
}
}
else
{
rt_kprintf("Usage: \n");
rt_kprintf("pwm probe <device name> - probe pwm by name\n");
rt_kprintf("pwm enable <channel> - enable pwm channel\n");
rt_kprintf("pwm disable <channel> - disable pwm channel\n");
rt_kprintf("pwm get <channel> - get pwm channel info\n");
rt_kprintf("pwm set <channel> <period> <pulse> - set pwm channel info\n");
rt_kprintf("pwm pulse <channel> <pulse> - set pwm pulse\n");
rt_kprintf("pwm phase <channel> <phase> - set pwm phase\n");
rt_kprintf("pwm dead_time <channel> <dead_time> - set pwm dead time\n");
result = -RT_ERROR;
}
return RT_EOK;
}
MSH_CMD_EXPORT(pwm, pwm [option]);