我们都知道 elastic search 是近实时的搜索系统，这里面的原因究竟是什么呢？es 是近实时，是因为 lucene 是近实时的。我们看一段 lucene 的示例代码：
使用的 lucene 版本如下：
<dependency>
<groupId>org.apache.lucene</groupId>
<artifactId>lucene-core</artifactId>
<version>8.9.0</version>
</dependency>
1 Analyzer analyzer = new StandardAnalyzer();
2
3 Path indexPath = new File("tmp_index").toPath();
4 IOUtils.rm(indexPath);
5 Directory directory = FSDirectory.open(indexPath);
6 IndexWriterConfig config = new IndexWriterConfig(analyzer);
7 // 使用 compound file
8 config.setUseCompoundFile(true);
9 // config.setInfoStream(System.out);
10 IndexWriter iw = new IndexWriter(directory, config);
11 // Now search the index:
12 StandardDirectoryReader oldReader = (StandardDirectoryReader) DirectoryReader.open(iw);
13
14 // 添加文档 1
15 Document doc = new Document();
16 doc.add(new Field("name", "Pride and Prejudice", TextField.TYPE_STORED));
17 doc.add(new Field("line", "It is a truth universally acknowledged, that a single man in possession of a good fortune, must be in want of a wife.", TextField.TYPE_STORED));
18 doc.add(new Field("chapters", "1", TextField.TYPE_STORED));
19 iw.addDocument(doc);
20
21 IndexSearcher searcher = new IndexSearcher(oldReader);
22 // Parse a simple query that searches for "text":
23 QueryParser parser = new QueryParser("name", analyzer);
24 Query query = parser.parse("prejudice");
25 ScoreDoc[] hits = searcher.search(query, 10).scoreDocs;
26 // Iterate through the results:
27 System.out.println("第一次查询：");
28 System.out.printf("version=%d, segmentInfos=%s\n", oldReader.getVersion(),
29 oldReader.getSegmentInfos());
30 for (int i = 0; i < hits.length; i++) {
31 System.out.println(hits[i]);
32 }
33
34 StandardDirectoryReader newReader = (StandardDirectoryReader) DirectoryReader.openIfChanged(oldReader);
35 oldReader.close();
36
37 searcher = new IndexSearcher(newReader);
38 hits = searcher.search(query, 10).scoreDocs;
39 System.out.println("第二次查询：");
40 System.out.printf("version=%d, segmentInfos=%s\n", newReader.getVersion(),
41 newReader.getSegmentInfos());
42 // Iterate through the results:
43 for (int i = 0; i < hits.length; i++) {
44 System.out.println(hits[i]);
45 }
46
47 iw.commit();
48 newReader.close();
49 directory.close();在第 15 行处，添加一个文档，然后执行搜索，并没有查询到文档。
在第 34 行处，调用 DirectoryReader.openIfChanged 方法，然后使用新的 reader 执行搜索，则可以查询到文档，注意此时文档仍然没有 flush 到磁盘中。
在第 47 行处，调用 IndexWriter.commit 方法，执行 flush 写盘。
OK ，现在看到了近实时的现象，对应到 ES 中的操作，在 ES 中写入一个文档，如同 15 行的操作，写入并不是立即可见；
需要执行 refresh，对应到第 24 行代码的 openIfChanged 方法；
ES 执行 flush 则对应到第 47 行的 IndexWriter.commit 方法。
针对网上所说的，ES 每次 refresh 之后都会生成一个 segment，看看 debug 截图：
openIfChanged 之后确实生成了一个 SegmentReader
附加２个小问题：1. 当不指定文档ID时，这个ID是如何生成的？ES确实有一个算法
// org.elasticsearch.common.TimeBasedUUIDGenerator#getBase64UUID
public String getBase64UUID() {
final int sequenceId = sequenceNumber.incrementAndGet() & 0xffffff;
long currentTimeMillis = currentTimeMillis();
long timestamp = this.lastTimestamp.updateAndGet(lastTimestamp -> {
// Don't let timestamp go backwards, at least "on our watch" (while this JVM is running). We are
// still vulnerable if we are shut down, clock goes backwards, and we restart... for this we
// randomize the sequenceNumber on init to decrease chance of collision:
long nonBackwardsTimestamp = Math.max(lastTimestamp, currentTimeMillis);
if (sequenceId == 0) {
// Always force the clock to increment whenever sequence number is 0, in case we have a long
// time-slip backwards:
nonBackwardsTimestamp++;
}
return nonBackwardsTimestamp;
});
final byte[] uuidBytes = new byte[15];
int i = 0;
// We have auto-generated ids, which are usually used for append-only workloads.
// So we try to optimize the order of bytes for indexing speed (by having quite
// unique bytes close to the beginning of the ids so that sorting is fast) and
// compression (by making sure we share common prefixes between enough ids),
// but not necessarily for lookup speed (by having the leading bytes identify
// segments whenever possible)
// Blocks in the block tree have between 25 and 48 terms. So all prefixes that
// are shared by ~30 terms should be well compressed. I first tried putting the
// two lower bytes of the sequence id in the beginning of the id, but compression
// is only triggered when you have at least 30*2^16 ~= 2M documents in a segment,
// which is already quite large. So instead, we are putting the 1st and 3rd byte
// of the sequence number so that compression starts to be triggered with smaller
// segment sizes and still gives pretty good indexing speed. We use the sequenceId
// rather than the timestamp because the distribution of the timestamp depends too
// much on the indexing rate, so it is less reliable.
uuidBytes[i++] = (byte) sequenceId;
// changes every 65k docs, so potentially every second if you have a steady indexing rate
uuidBytes[i++] = (byte) (sequenceId >>> 16);
// Now we start focusing on compression and put bytes that should not change too often.
uuidBytes[i++] = (byte) (timestamp >>> 16); // changes every ~65 secs
uuidBytes[i++] = (byte) (timestamp >>> 24); // changes every ~4.5h
uuidBytes[i++] = (byte) (timestamp >>> 32); // changes every ~50 days
uuidBytes[i++] = (byte) (timestamp >>> 40); // changes every 35 years
byte[] macAddress = macAddress();
assert macAddress.length == 6;
System.arraycopy(macAddress, 0, uuidBytes, i, macAddress.length);
i += macAddress.length;
// Finally we put the remaining bytes, which will likely not be compressed at all.
uuidBytes[i++] = (byte) (timestamp >>> 8);
uuidBytes[i++] = (byte) (sequenceId >>> 8);
uuidBytes[i++] = (byte) timestamp;
assert i == uuidBytes.length;
return Base64.getUrlEncoder().withoutPadding().encodeToString(uuidBytes);
}
2. 网上传言当 index buffer 满时，会触发 refresh 的动作，判断 buffer 是否满，这个参数到底是啥
/**
* Determines the amount of RAM that may be used for buffering added documents
* and deletions before they are flushed to the Directory. Generally for
* faster indexing performance it's best to flush by RAM usage instead of
* document count and use as large a RAM buffer as you can.
* <p>
* When this is set, the writer will flush whenever buffered documents and
* deletions use this much RAM. Pass in
* {@link IndexWriterConfig#DISABLE_AUTO_FLUSH} to prevent triggering a flush
* due to RAM usage. Note that if flushing by document count is also enabled,
* then the flush will be triggered by whichever comes first.
* <p>
* The maximum RAM limit is inherently determined by the JVMs available
* memory. Yet, an {@link IndexWriter} session can consume a significantly
* larger amount of memory than the given RAM limit since this limit is just
* an indicator when to flush memory resident documents to the Directory.
* Flushes are likely happen concurrently while other threads adding documents
* to the writer. For application stability the available memory in the JVM
* should be significantly larger than the RAM buffer used for indexing.
* <p>
* <b>NOTE</b>: the account of RAM usage for pending deletions is only
* approximate. Specifically, if you delete by Query, Lucene currently has no
* way to measure the RAM usage of individual Queries so the accounting will
* under-estimate and you should compensate by either calling commit() or refresh()
* periodically yourself.
* <p>
* <b>NOTE</b>: It's not guaranteed that all memory resident documents are
* flushed once this limit is exceeded. Depending on the configured
* {@link FlushPolicy} only a subset of the buffered documents are flushed and
* therefore only parts of the RAM buffer is released.
* <p>
*
* The default value is {@link IndexWriterConfig#DEFAULT_RAM_BUFFER_SIZE_MB}.
*
* <p>
* Takes effect immediately, but only the next time a document is added,
* updated or deleted.
*
* @see IndexWriterConfig#setRAMPerThreadHardLimitMB(int)
*
* @throws IllegalArgumentException
* if ramBufferSize is enabled but non-positive, or it disables
* ramBufferSize when maxBufferedDocs is already disabled
*/
public synchronized LiveIndexWriterConfig setRAMBufferSizeMB(double ramBufferSizeMB) {
if (ramBufferSizeMB != IndexWriterConfig.DISABLE_AUTO_FLUSH && ramBufferSizeMB <= 0.0) {
throw new IllegalArgumentException("ramBufferSize should be > 0.0 MB when enabled");
}
if (ramBufferSizeMB == IndexWriterConfig.DISABLE_AUTO_FLUSH
&& maxBufferedDocs == IndexWriterConfig.DISABLE_AUTO_FLUSH) {
throw new IllegalArgumentException("at least one of ramBufferSize and maxBufferedDocs must be enabled");
}
this.ramBufferSizeMB = ramBufferSizeMB;
return this;
}该参数默认是 16 MB
// org.apache.lucene.index.IndexWriterConfig
public static final double DEFAULT_RAM_BUFFER_SIZE_MB = 16.0;