samba-摩杜云开发者社区

ftp用户端与服务端之间是通过协议访问的，但不支持通过挂载的方式访问，因为他不是一个文件系统。

samba这款软件使用的是CIFS协议，使用CIFS这个协议的软件不仅有SAMBA软件，还有windows 系统的共享功能；samba可以实现跨操作系统平台的文件共享，比如linux和windows之间的文件共享、linux与linux之间的共享、windows与windows之间的共享；

centos7搭建注意点：

注意地址解析问题
无需重启服务配置文件就能生效，但最好重启服务，重启两个服务smb、nmb
注意版本问题
注意smb的权限与文件系统权限的交集

samba的问题：

最大的问题就是权限问题，在权限当中搞的太灵活了，valid users、write list、read only之间的关系相互有冲突，让人搞不清是哪一条在起作用，让人非常恼火，我们可以在samba当中很轻松的让某些用户或组有读写权限，让匿名用户有只读权限，但是很难让某个普通用户拥有只读权限；

第二个就是需要周围设置，比如有时候需要windows开启smb1.0功能，有时候还要注意其解析问题。总的来说，肯定是不如windows使用共享用鼠标点几下来的方便。

需求

development_1的成员：zhangsan、lisi、wanger
development_2的成员：jia、yi、bing

希望实现匿名用户有读权限，而以上两个组的成员具有读写权限；

###################################服务端配置
[root@c71 ~]# !17
ip addr show ens33 | awk -F" " 'NR==3{print $2}'
192.168.80.136/24
# 下面这几项必须保持一致，不然的话，当我们用客户端访问卡的要死
[root@c71 ~]# hostname
c71
[root@c71 ~]# cat /etc/hostname
c71
[root@c71 ~]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4 c71
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6 c71
[root@c71 ~]# ping c71
PING localhost (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.037 ms

[root@c71 ~]# cat /etc/redhat-release 
CentOS Linux release 7.9.2009 (Core)
[root@c71 ~]# systemctl stop firewalld
[root@c71 ~]# systemctl disable firewalld
[root@c71 ~]# cat /etc/selinux/config  | grep disabled
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
[root@c71 ~]# yum -y install samba &> /dev/null; 
[root@c71 ~]#systemctl enable smb ; systemctl enable nmb ; systemctl start smb ; systemctl start nmb ;
[root@c71 ~]# ss -tunlp | egrep '(445|137|138|139)'
[root@c71 /]# mkdir /smb_share ; chmod 777 /smb_share

[root@c71 ~]# groupadd development_2
[root@c71 ~]# groupadd development_1
[root@c71 ~]# useradd -s /sbin/nologin -g development_1 zhangsan
[root@c71 ~]# useradd -s /sbin/nologin -g development_1 lisi
[root@c71 ~]# useradd -s /sbin/nologin -g development_1 wanger
[root@c71 ~]# useradd -s /sbin/nologin -g development_2 jia
[root@c71 ~]# useradd -s /sbin/nologin -g development_2 yi
[root@c71 ~]# useradd -s /sbin/nologin -g development_2 bing
Failed to find entry for user zhangsan.
[root@c71 ~]# smbpasswd -a zhangsan
New SMB password:
Retype new SMB password:
Added user zhangsan.
[root@c71 ~]# smbpasswd -a lisi
New SMB password:
Retype new SMB password:
Added user lisi.
[root@c71 ~]# smbpasswd -a wanger
New SMB password:
Retype new SMB password:
Added user wanger.
[root@c71 ~]# smbpasswd -a jia
New SMB password:
Retype new SMB password:
Added user jia.
[root@c71 ~]# smbpasswd -a yi
New SMB password:
Retype new SMB password:
Added user yi.
[root@c71 ~]# smbpasswd -a bing
New SMB password:
Retype new SMB password:
Added user bing.
[root@c71 ~]# smbpasswd -e bing
Enabled user bing.
[root@c71 ~]# smbpasswd -e yi
Enabled user yi.
[root@c71 ~]# smbpasswd -e jia
Enabled user jia.
[root@c71 ~]# smbpasswd -e zhangsan
Enabled user zhangsan.
[root@c71 ~]# smbpasswd -e wanger
Enabled user wanger.
[root@c71 ~]# smbpasswd -e lisi
Enabled user lisi.

[root@c71 ~]# testparm 
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
# Global parameters
[global]
  printcap name = cups
  security = USER
  workgroup = SAMBA
  idmap config * : backend = tdb
  cups options = raw

[smb_share]
  comment = smb_share
  guest ok = Yes
  path = /smb_share
  write list = @development_1 @development_2
###################################客户端测试##########
root@u21:~# apt -y install samba-client &> /dev/null
root@u21:~# smbclient //192.168.80.136/smb_share
Enter WORKGROUP\root's password:
Anonymous login successful
Try "help" to get a list of possible commands.
smb: \> ls
  .                                   D        0  Sun Feb 20 11:14:50 2022
  ..                                  D        0  Sun Feb 20 11:12:48 2022
  issue                               N       23  Sun Feb 20 11:14:50 2022
  fstab                               N      541  Sun Feb 20 11:14:50 2022
  hostname                            N        4  Sun Feb 20 11:14:50 2022
  passwd                              N     1434  Sun Feb 20 11:14:50 2022

                52403200 blocks of size 1024. 50726628 blocks available
smb: \> rm issue
NT_STATUS_ACCESS_DENIED deleting remote file \issue

root@u21:~# smbclient //192.168.80.136/smb_share -U jia%cba-123
Try "help" to get a list of possible commands.
smb: \> ls
  .                                   D        0  Sun Feb 20 11:14:50 2022
  ..                                  D        0  Sun Feb 20 11:12:48 2022
  issue                               N       23  Sun Feb 20 11:14:50 2022
  fstab                               N      541  Sun Feb 20 11:14:50 2022
  hostname                            N        4  Sun Feb 20 11:14:50 2022
  passwd                              N     1434  Sun Feb 20 11:14:50 2022

                52403200 blocks of size 1024. 50726764 blocks available
smb: \> rm issue
NT_STATUS_ACCESS_DENIED deleting remote file \issue
smb: \> exit
root@u21:~# smbclient //192.168.80.136/smb_share -U jia%cba-123
Try "help" to get a list of possible commands.
smb: \> ls
  .                                   D        0  Sun Feb 20 11:14:50 2022
  ..                                  D        0  Sun Feb 20 11:12:48 2022
  issue                               N       23  Sun Feb 20 11:14:50 2022
  fstab                               N      541  Sun Feb 20 11:14:50 2022
  hostname                            N        4  Sun Feb 20 11:14:50 2022
  passwd                              N     1434  Sun Feb 20 11:14:50 2022

                52403200 blocks of size 1024. 50726744 blocks available
smb: \> rm issue
smb: \> exit
root@u21:~# smbclient //192.168.80.136/smb_share -U zhangsan%cba-123
Try "help" to get a list of possible commands.
smb: \> ls
  .                                   D        0  Sun Feb 20 11:16:14 2022
  ..                                  D        0  Sun Feb 20 11:12:48 2022
  fstab                               N      541  Sun Feb 20 11:14:50 2022
  hostname                            N        4  Sun Feb 20 11:14:50 2022
  passwd                              N     1434  Sun Feb 20 11:14:50 2022

                52403200 blocks of size 1024. 50726748 blocks available
smb: \> rm passwd
smb: \> exit

基本原理

samba组件

netbios（网络基本输入输出系统，windows主机之间基于主机名互相通信的机制，是广播机制）

windows既然不开共享，也会侦听137和138，因为netbios就是windows通过主机名进行互相访问的基础服务，smb也需要这种服务，每一次特别慢，因为第一次是广播。netbiosnmbd服务器控制，这个服务最好要打开，因为如果不打开windows访问的时候会非常慢。

wins

netbios广播解析太慢了，后面出现了单节点解析，也就是netbios的升级版，也叫wins服务，

winbind

samba的三个子服务之一、当samba启用了AD域功能之后，才会启动此服务，使用AD域需要打开winbindd

配置文件

配置文件结构：配置文件的结构是这样的，总体分为全局设定和特定共享设定，而特定共享设定又分为：家目录、打印机、自定义共享；

全局设定

global：netbios、workgroup

smb服务端有两种服务模式：域模式、工作组；
smb服务端有个服务：smb和nmb、smb侦听在tcp/139和tcp/445，主要用来传输使用（windows共享也是如此），nmb主要用来解析netbios地址，侦听在udp/137和udp/138端口。

[root@C8 ~]# rpm -ql samba | grep sys  有两个system文件意味着有两个服务，一个常用，一个不常用
/usr/lib/systemd/system/nmb.service
/usr/lib/systemd/system/smb.service

# 解释配置文件，example里面有比较详细的解释
[root@C8 ~]# cd /etc/samba/ && ls
lmhosts  smb.conf  smb.conf.example
[root@C8 samba]# egrep -v '(^$|^#)' smb.conf 
# 全局设置
[global]
# workgroup = SAMBA  # 工作组的名称，这和windows的工作组是一个意思，沿袭了windows一部分东西，windows的默认工作组是workgroup，好改一下；
# 在centos6是可以通过sambaclient -L 探测服务端的工作组，centos7不行；
  workgroup = WORKGROUP
# netbios的作用就是访问的时候可以使用netbiosname，而不用使用IP，有点类似于域名的概念，smbclient -L 后面直接跟netbios名字，但要依赖nmb服务
# 也就是说要先启动nmb之后，客户端才能使用netbios名字进行访问，smb是侦听在137、138两端口，注意，Ping netbios是不行的
  netbios name = linux40
  security = user
  passdb backend = tdbsam
  printing = cups
  printcap name = cups
  load printers = yes
  cups options = raw
[homes]
  comment = Home Directories
  valid users = %S, %D%w%S
  browseable = No
  read only = No
  inherit acls = Yes
[printers]
  comment = All Printers
  path = /var/tmp
  printable = Yes
  create mask = 0600
  browseable = No
[print$]
  comment = Printer Drivers
  path = /var/lib/samba/drivers
  write list = @printadmin root
  force group = @printadmin
  create mask = 0664
  directory mask = 0775

user

smb用户必须先是系统用户，用户的密码是通过samba自己维护的。

# 当我们通过windows访问centos的smb的时候，让我们输入的账号并不是centos系统用户的账号，而是samba用户的账号和密码。
# 添加访问的用户，smb用户首先得是一个系统用户，其次才能成为一个smb用户；
# 列出smb用户
[root@C8 ~]# pdbedit -L
[root@C8 ~]# useradd -s /sbin/nologin smb1
[root@C8 ~]# useradd -s /sbin/nologin smb2
# 添加smb用户
[root@C8 ~]# smbpasswd -a smb1
New SMB password:
Retype new SMB password:
Added user smb1.
[root@C8 ~]# smbpasswd -a smb2
New SMB password:
Retype new SMB password:
Added user smb2.
# 修改用户密码
[root@C8 ~]# smbpasswd smb1
New SMB password:
Retype new SMB password:
# 再列出
[root@C8 ~]# pdbedit -L
smb1:1001:
smb2:1002:
# 删除账号
[root@C8 ~]# smbpasswd -x smb1

# 下面这个文件就是smb的用户数据库文件
[root@C8 ~]# ll /var/lib/samba/private/passdb.tdb 
-rw-------. 1 root root 421888 11月 14 18:51 /var/lib/samba/private/passdb.tdb

# 查看用户的详细信息，有一个SID，也是从微软当中模拟而来的
[root@C8 ~]# pdbedit -L -v smb1
Unix username:        smb1
NT username:          
Account Flags:        [U          ]
User SID:             S-1-5-21-3762892953-1983712240-1896709800-1000    # 用户SID
Primary Group SID:    S-1-5-21-3762892953-1983712240-1896709800-513
Full Name:            
Home Directory:       \\LINUX40\smb1
HomeDir Drive:        
Logon Script:         
Profile Path:         \\LINUX40\smb1\profile
Domain:               LINUX40
Account desc:         
Workstations:         
Munged dial:          
Logon time:           0
Logoff time:          三, 06 2月 2036 23:06:39 CST
Kickoff time:         三, 06 2月 2036 23:06:39 CST
Password last set:    日, 14 11月 2021 18:54:12 CST
Password can change:  日, 14 11月 2021 18:54:12 CST
Password must change: never
Last bad password   : 0
Bad password count  : 0
Logon hours         : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

# 查看smb当前状态，当前没有人任何人连接
[root@C8 ~]# smbstatus 

Samba version 4.13.3
PID     Username     Group        Machine                                   Protocol Version  Encryption           Signing              
----------------------------------------------------------------------------------------------------------------------------------------
Service      pid     Machine       Connected at                     Encryption   Signing     
---------------------------------------------------------------------------------------------
No locked files

host allow

# 允许哪台主机访问，10. 就代表网络位是10就可以，也可以写死
[global]
        hosts allow = 10. 192.168. 192.168.0.105

log

为每一个客户端单独准备一个日志文件

[global]
        log_file = /var/log/samba/log.%I
        log level = 2 日志级别，默认是0，不记录。

# 效果是为每一个客户端单独准备一个日志文件
[root@C8 ~]# ls /var/log/samba/
cores  log.0.0.0.0  log.192.168.0.105  log.nmbd  log.smbd  old

# 测试一下
[root@template ~]# smbclient -L 192.168.0.104 -U smb1%123

  Sharename       Type      Comment
  ---------       ----      -------
  print$          Disk      Printer Drivers
  IPC$            IPC       IPC Service (Samba 4.13.3)
  smb1            Disk      Home Directories     # 默认把自己家目录给共享出来了
Reconnecting with SMB1 for workgroup listing.
smbXcli_negprot_smb1_done: No compatible protocol selected by server.
protocol negotiation failed: NT_STATUS_INVALID_NETWORK_RESPONSE
Unable to connect with SMB1 -- no workgroup available

[root@C8 samba]# cat log.192.168.0.105
[2021/11/14 19:24:06.145968,  2] ../../source3/auth/auth.c:329(auth_check_ntlm_password)
  check_ntlm_password:  authentication for user [smb1] -> [smb1] -> [smb1] succeeded   # 看到客户端信息
[2021/11/14 19:24:06.146691,  2] ../../source3/param/loadparm.c:2864(lp_do_section)
  Processing section "[homes]"
[2021/11/14 19:24:06.146856,  2] ../../source3/param/loadparm.c:2864(lp_do_section)
  Processing section "[printers]"
[2021/11/14 19:24:06.146964,  2] ../../source3/param/loadparm.c:2864(lp_do_section)
  Processing section "[print$]"

# 在客户端上直接访问服务端家目录
[root@template ~]# smbclient //192.168.0.104/smb1 -U smb1%cba-123
Try "help" to get a list of possible commands.
smb: \> ls
NT_STATUS_ACCESS_DENIED listing \*

# 在服务端上看连接
[root@C8 ~]# smbstatus 
Samba version 4.13.3
PID     Username     Group        Machine                                   Protocol Version  Encryption           Signing              
----------------------------------------------------------------------------------------------------------------------------------------
37329   smb1         smb1         192.168.0.105 (ipv4:192.168.0.105:43574)  SMB3_11           -                    partial(AES-128-CMAC)

Service      pid     Machine       Connected at                     Encryption   Signing     
---------------------------------------------------------------------------------------------
smb1         37329   192.168.0.105 日 11月 14 19时26分42秒 2021 CST -            -           

No locked files

# 默认家目录共享，全是因为这个模块下的内容
[homes]
  comment = Home Directories
  valid users = %S, %D%w%S
  browseable = No
  read only = No
  inherit acls = Yes

其它

security = user，通过什么方式访问，user的意思是通过账号和密码的方式访问
passdb backend = tdbsam，这就是用户名密码存储的地方

家目录

[homes]
        # 注释信息
        comment = Home Directories
        # 有效用户，就是自己
        valid users = %S, %D%w%S

        # 是否允许它人浏览自己的家目录，默念不允许
        browseable = No
        read only = No
        inherit acls = Yes

自定义

[shared_name]
  path = /path/to/share_directory
  # 注释信息
  comment = COMMENT

  # 是否允许来宾访问
  guest ok  = yes

  # 是否可写，另一种写法是read only = No 是不是只读的，如果是只读的，那就是writable的no；
  writable = yes

  # 允许写入的用户列表，多个用户之间用逗分隔，组的话前面加@
  write list = user1,user2,user3,@g1

  # 允许读取的用户列表
  valid users = user3,user4,@g2

# 测试语法是否有错 
testpram

客户端

# c7探测目标c8主机共享了哪些文件夹
[root@template ~]# smbclient -L 192.168.0.104
Enter SAMBA\root's password:   #这里没输入密码，直接回车，因为服务端暂时还没为sab用户创建用户名和密码
Anonymous login successful     # 表示支持匿名访问

  Sharename       Type      Comment   # 当前结果显示没有共享任何内容
  ---------       ----      -------
  print$          Disk      Printer Drivers 
  IPC$            IPC       IPC Service (Samba 4.13.3)
Reconnecting with SMB1 for workgroup listing.
smbXcli_negprot_smb1_done: No compatible protocol selected by server.
protocol negotiation failed: NT_STATUS_INVALID_NETWORK_RESPONSE
Unable to connect with SMB1 -- no workgroup available

# c7探测目标windows主机共享了哪些文件夹
yum list samba*
yum -y install samba-client
[root@template ~]# smbclient -L 192.168.0.115 -U zhanghe%PASSWD

  Sharename       Type      Comment
  ---------       ----      -------
  ADMIN$          Disk      远程管理
  C$              Disk      默认共享
  D$              Disk      默认共享
  IPC$            IPC       远程 IPC
  VT              Disk      
Reconnecting with SMB1 for workgroup listing.
do_connect: Connection to 192.168.0.115 failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
Unable to connect with SMB1 -- no workgroup available

[root@template ~]# smbclient //192.168.0.115/VT -U zhanghe%PASSWD
Try "help" to get a list of possible commands.
smb: \> ls
smb: \> pwd
Current directory is \\192.168.0.115\VT\
smb: \> get 网络安全公开课20211012.mp4
smb: \> !ls   # 查看当前目录
anaconda-ks.cfg  网络安全公开课20211012.mp4
smb: \> put anaconda-ks.cfg 
putting file anaconda-ks.cfg as \anaconda-ks.cfg (290.3 kb/s) (average 290.3 kb/s)

挂载访问

mount -t cifs //SERVER/shared_name /local_point -o username=USERNAME,password=PASSWORD

/etc/fstab写到里面，开机自动挂载放到fstab会有密码泄露的风险，不建议开机自动挂载；

测试

仅有path

所有人都能读、也就是说所有人都能下载，但不能上传和删除，不能匿名

# 服务端
[root@c71 ~]# grep development /etc/group
development_1:x:1000:
development_2:x:1001:
[root@c71 ~]# tail -6 /etc/passwd
lisi:x:1001:1000::/home/lisi:/sinb/nologin
wanger:x:1002:1000::/home/wanger:/sinb/nologin
jia:x:1003:1001::/home/jia:/sinb/nologin
yi:x:1004:1001::/home/yi:/sinb/nologin
bing:x:1005:1001::/home/bing:/sinb/nologin
zhanghe:x:1006:1006::/home/zhanghe:/sbin/nologin
[root@c71 ~]# egrep -v '(^[[:space:]*$]]|^#)' /etc/samba/smb.conf
[global]
  workgroup = SAMBA
  security = user
  passdb backend = tdbsam
  printing = cups
  printcap name = cups
  load printers = yes
  cups options = raw
[samba_share]
  path = /smb_share

# 客户端
[root@c72 ~]# smbclient -L 192.168.80.130
Enter SAMBA\root's password: 
Anonymous login successful

  Sharename       Type      Comment
  ---------       ----      -------
  samba_share     Disk      
  IPC$            IPC       IPC Service (Samba 4.10.16)
Reconnecting with SMB1 for workgroup listing.
Anonymous login successful

  Server               Comment
  ---------            -------

  Workgroup            Master
  ---------            -------
  SAMBA                C71

# 能下载，不能删除和上传
[root@c72 ~]# smbclient //192.168.80.130/samba_share -U zhangsan%cba-123
Try "help" to get a list of possible commands.
smb: \> ls
  .                                   D        0  Sun Feb 20 01:52:18 2022
  ..                                  D        0  Sat Feb 19 20:49:26 2022
  fstab                               A      465  Sat Feb 19 21:36:34 2022
  passwd                              N     1483  Sun Feb 20 01:52:18 2022
  issue                               N       23  Sun Feb 20 01:52:18 2022

    52403200 blocks of size 1024. 50726904 blocks available
smb: \> get issue 
getting file \issue of size 23 as issue (4.5 KiloBytes/sec) (average 4.5 KiloBytes/sec)
smb: \> rm issue 
NT_STATUS_ACCESS_DENIED deleting remote file \issue
smb: \> put anaconda-ks.cfg 
NT_STATUS_ACCESS_DENIED opening remote file \anaconda-ks.cfg

# 不能匿名
[root@c72 ~]# smbclient //192.168.80.130/samba_share
Enter SAMBA\root's password: 
Anonymous login successful
tree connect failed: NT_STATUS_ACCESS_DENIED

public

public其实主浊guest ok ，如果我们写成public 那就是翻译成guest，是一个意思，就是是否允许匿名访问，打开了之后匿名用户也只是拥有下载权限；

# 服务端
[root@c71 ~]# grep -v "^#" /etc/samba/smb.conf
[global]
  workgroup = SAMBA
  security = user
  passdb backend = tdbsam
  printing = cups
  printcap name = cups
  load printers = yes
  cups options = raw
[samba_share]
  path = /smb_share
  public = yes

# 客户端匿名访问测试
[root@c72 ~]# smbclient //192.168.80.130/samba_share
Enter SAMBA\root's password: 
Anonymous login successful
Try "help" to get a list of possible commands.
smb: \> put anaconda-ks.cfg 
NT_STATUS_ACCESS_DENIED opening remote file \anaconda-ks.cfg
smb: \> get issue 
getting file \issue of size 23 as issue (3.7 KiloBytes/sec) (average 3.7 KiloBytes/sec)
smb: \> rm issue 
NT_STATUS_ACCESS_DENIED deleting remote file \issue
smb: \> ls
  .                                   D        0  Sun Feb 20 01:52:18 2022
  ..                                  D        0  Sat Feb 19 20:49:26 2022
  fstab                               A      465  Sat Feb 19 21:36:34 2022
  passwd                              N     1483  Sun Feb 20 01:52:18 2022
  issue                               N       23  Sun Feb 20 01:52:18 2022

    52403200 blocks of size 1024. 50726172 blocks available

# 普通用户的权限没变，还是只能下载
[root@c72 ~]# smbclient //192.168.80.130/samba_share -U lisi%cba-123
Try "help" to get a list of possible commands.
smb: \> put anaconda-ks.cfg 
NT_STATUS_ACCESS_DENIED opening remote file \anaconda-ks.cfg
smb: \> get fstab 
getting file \fstab of size 465 as fstab (151.4 KiloBytes/sec) (average 151.4 KiloBytes/sec)
smb: \> rm fstab 
NT_STATUS_ACCESS_DENIED deleting remote file \fstab
smb: \> ls
  .                                   D        0  Sun Feb 20 01:52:18 2022
  ..                                  D        0  Sat Feb 19 20:49:26 2022
  fstab                               A      465  Sat Feb 19 21:36:34 2022
  passwd                              N     1483  Sun Feb 20 01:52:18 2022
  issue                               N       23  Sun Feb 20 01:52:18 2022

    52403200 blocks of size 1024. 50726132 blocks available

writable

是否能被所有用户可写，默认是no，等价于read only，writable = yes 等价于 read only = no

# 服务端
[root@c71 ~]# testparm 
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
  printcap name = cups
  security = USER
  workgroup = SAMBA
  idmap config * : backend = tdb
  cups options = raw

[samba_share]
  guest ok = Yes
  path = /smb_share
  read only = No   # 自动翻译成read only

# 客户端匿名用户获得读写权限
[root@c72 ~]# smbclient //192.168.80.130/samba_share 
Enter SAMBA\root's password: 
Anonymous login successful
Try "help" to get a list of possible commands.
smb: \> put anaconda-ks.cfg 
putting file anaconda-ks.cfg as \anaconda-ks.cfg (7.2 kb/s) (average 7.2 kb/s)
smb: \> rm issue

# 客户端的普通用户还是仅有读的权限
[root@c72 ~]# smbclient //192.168.80.130/samba_share -U zhangsan%cba-123
Try "help" to get a list of possible commands.
smb: \> put anaconda-ks.cfg 
NT_STATUS_ACCESS_DENIED opening remote file \anaconda-ks.cfg
smb: \> put /etc/issue
NT_STATUS_OBJECT_PATH_NOT_FOUND opening remote file \etc\issue
smb: \> rm issue 
NT_STATUS_NO_SUCH_FILE listing \issue
smb: \> get issue 
NT_STATUS_OBJECT_NAME_NOT_FOUND opening remote file \issue
smb: \> get fstab 
getting file \fstab of size 465 as fstab (75.7 KiloBytes/sec) (average 75.7 KiloBytes/sec)

valid users

valid user 是非常的强劲，不是仅允许谁访问，不在名单内部的都不允许看到，当valied users与write lists同在时，valied users生效。

# 服务端
[root@c71 ~]# testparm 
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
  printcap name = cups
  security = USER
  workgroup = SAMBA
  idmap config * : backend = tdb
  cups options = raw

[samba_share]
  guest ok = Yes
  path = /smb_share
  read only = No
  valid users = @development_1

# development 拥有完整的权限
[root@c72 ~]# smbclient //192.168.80.130/samba_share -U lisi%cba-123
Try "help" to get a list of possible commands.
smb: \> get issue 
NT_STATUS_OBJECT_NAME_NOT_FOUND opening remote file \issue
smb: \> get fstab 
getting file \fstab of size 465 as fstab (90.8 KiloBytes/sec) (average 90.8 KiloBytes/sec)
smb: \> rm fstab 
smb: \> put anaconda-ks.cfg 
NT_STATUS_ACCESS_DENIED opening remote file \anaconda-ks.cfg
smb: \> put issue 
putting file issue as \issue (5.6 kb/s) (average 5.6 kb/s)
smb: \> exit
[root@c72 ~]# smbclient //192.168.80.130/samba_share -U jia%cba-123
tree connect failed: NT_STATUS_ACCESS_DENIED
[root@c72 ~]# smbclient //192.168.80.130/samba_share -U yi%cba-123
tree connect failed: NT_STATUS_ACCESS_DENIED

# 匿名关闭
[root@c72 ~]# smbclient //192.168.80.130/samba_share 
Enter SAMBA\root's password: 
Anonymous login successful
tree connect failed: NT_STATUS_ACCESS_DENIED

write list

完全独立，最好不要与其它选项连用，就是在这个列表里面才有完整的权限