linux下mas2312存储配置-摩杜云开发者社区

今天梳理资产发现公司还有2台低端HP存储，之前都没写配置记录，记录一下，拿来做测试机用

主要涉及三块配置

1.博科光纤交换机

2.存储配置划分

3.服务器配置

博科交换机配置：

查看交换机基本配置信息：

swd77:root> switchshow
switchName: swd77
switchType: 71.2
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:1e:bd:ae:f0
zoning: ON (cfg1)
switchBeacon: OFF

Area Port Media Speed State Proto
=====================================
0 0 id N4 Online L-Port 1 public
1 1 id N4 Online L-Port 1 public
2 2 id N4 No_Light
3 3 id N4 Online F-Port 10:00:00:00:c9:82:4e:88 --服务器的wwn号
4 4 id N4 Online L-Port 1 public
5 5 id N4 Online L-Port 1 public
6 6 id N4 No_Light
7 7 id N4 No_Light
8 8 id N4 No_Light
9 9 id N4 No_Light
10 10 id N4 No_Light
11 11 id N4 No_Light
12 12 id N4 No_Light
13 13 id N4 No_Light
14 14 id N4 No_Light
15 15 id N4 No_Light
16 16 id N4 No_Light
17 17 id N4 No_Light
18 18 id N4 No_Light
19 19 id N4 No_Light
20 20 id N4 No_Light
21 21 id N4 No_Light
22 22 id N4 No_Light
23 23 id N4 No_Light

通过portShow查看端口信息，可以看到wwn号，以便后一步进行zone配置

swd77:root> portShow 0
portName:
portHealth: No Fabric Watch License

Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x24b03 PRESENT ACTIVE F_PORT L_PORT U_PORT LOGICAL_ONLINE LOGIN NOELP LED ACCEPT FLOGI
portType: 18.0
POD Port: Port is licensed
portState: 1 Online
portPhys: 6 In_Sync
portScn: 32 F_Port
port generation number: 514
portId: 010000
portIfId: 43020017
portWwn: 20:00:00:05:1e:bd:ae:f0
portWwn of device(s) connected:
25:70:00:c0:ff:10:75:85
Distance: normal
portSpeed: N4Gbps

LE domain: 0
FC Fastwrite: OFF
Interrupts: 0 Link_failure: 0 Frjt: 0
Unknown: 9 Loss_of_sync: 29 Fbsy: 0
Lli: 209 Loss_of_sig: 32 Lip_in: 19
Proc_rqrd: 5149956 Protocol_err: 0 Lip_out: 25
Timed_out: 0 Invalid_word: 324814 Lip_Freq_Cnt: 0
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 0
Overrun: 0 Lr_in: 20
Suspended: 0 Lr_out: 16
Parity_err: 0 Ols_in: 15
2_parity_err: 0 Ols_out: 20
CMI_bus_err: 0

Port part of other ADs: No

禁用之前的配置

以下配置可以在web界面，也可以命令行界面

cfgdisable cfgname

如果有之前的alias，zone，cfg，用相应的命令 alias|zone|cfgdelete 删除之,这里注意一定先disable，否则所有操作都还在flash里面，重连还是会看到原来的配置

新建alias，zone，cfg

alicreate msa2012fc_172_16_3_195,"20:70:00:c0:ff:d7:08:c0;20:78:00:c0:ff:d7:08:c0"

alicreate msa2312fc_172_16_3_180,"25:70:00:c0:ff:10:75:85;21:70:00:c0:ff:10:75:85"

zonecreate z1, "host_172_16_3_174;msa2012fc_172_16_3_195;msa2312fc_172_16_3_180"

cfgcreate cfg1,"z1"

cfgenable cfg1

cfgsave

查看下配置完的信息：

root> cfgshow

Defined configuration:

cfg: cfg1 z1

zone: z1 host_172_16_3_174; msa2012fc_172_16_3_195;

msa2312fc_172_16_3_180

alias: host_172_16_3_174

10:00:00:00:c9:82:4e:88

alias: msa2012fc_172_16_3_195

20:70:00:c0:ff:d7:08:c0; 20:78:00:c0:ff:d7:08:c0

alias: msa2312fc_172_16_3_180

25:70:00:c0:ff:10:75:85; 21:70:00:c0:ff:10:75:85

Effective configuration:

cfg: cfg1

zone: z1 10:00:00:00:c9:82:4e:88

20:70:00:c0:ff:d7:08:c0

20:78:00:c0:ff:d7:08:c0

25:70:00:c0:ff:10:75:85

21:70:00:c0:ff:10:75:85

这里是把195的两个光纤口，180的两个光纤口，服务器的一快光纤卡加到一个zone里

存储配置划分：

清理之前划分的信息：

# show disks

ID Serial# Vendor Rev. State Type Size(GB) Rate(Gb/s) SP

------------------------------------------------------------------------------

0 3QP0CY6L000099130ART SEAGATE 0004 AVAIL SAS 300 3.0

1 JTY13ADJ HITACHI A5D0 AVAIL SAS 300 3.0

2 6SJ1BSD40000N139AW2Q SEAGATE 0008 AVAIL SAS 300 3.0

3 6SJ33GFJ0000N205BJUY SEAGATE 0008 AVAIL SAS 300 3.0

4 3LM5T1XM000099091LVA SEAGATE 0002 AVAIL SAS 300 3.0

6 JLX4GU3C HITACHI A570 AVAIL SAS 300 3.0

7 3QP0F2730000991309J0 SEAGATE 0004 AVAIL SAS 300 3.0

8 3QP0H4WE00009917FV0C SEAGATE 0004 AVAIL SAS 300 3.0

------------------------------------------------------------------------------

清理磁盘元数据

# clear disk-metadata 0,1,2,3,4,6,7,8

查看vdisk并删除

# show vd

Name Size Free Own RAID Dsk Spr Chk Stat Jobs Serial#

--------------------------------------------------------------------------------------------------------------

vd02 1198.7GB 732.8MB B RAID5 5 0 64 QTOF 00c0ff106a630000449df84c00000000

vd01 2099.8GB 881.5MB A RAID5 8 0 64 CRIT 00c0ffd70bed0000f715f94c00000000

# delete vdisk vd01

# delete vdisk vd02

清理之后，新建vd，volumes,map volume，这一步可以在web界面操作，也可以命令行

create volume vdisk vd01 size 500GB mapping 0-1.12 vd01vol01

create host-wwn-name wwn 10000000C9824E88 172_16_3_174

map volume access rw lun 1 host 172_16_3_174 vd01vol01

map volume access rw lun 2 host 172_16_3_174 vd01vol02

通过以下命令查看信息

# show hosts

Host ID Name Discovered Mapped Profile

-------------------------------------------------

10000000C9824E88 Yes Yes Standard --这台是服务器光纤卡的id，已经发现并映射

21FD00051EBDAEF0 Yes No Standard

21FD00051ED93251 Yes No Standard

#show host-maps

Host [WWN 10000000C9824E88, Name (172_16_3_174)] Mapping View:

Volume Name Volume SN ID LUN Access Channels

----------------------------------------------------------------------------

vd01vol01 00c0ffd70bed0000c8f73f5801000000 0 1 rw 0,1

vd01vol02 00c0ffd70bed0000f8f73f5801000000 0 2 rw 0,1

#show volume-maps

Volume [SN 00c0ffd70bed0000c8f73f5801000000, Name (vd01vol01)] mapping view:

CH ID LUN Access Host-Port-Identifier Nickname

-------------------------------------------------------------------------------

0,1 0 1 rw 10000000C9824E88 172_16_3_174

Volume [SN 00c0ffd70bed0000f8f73f5801000000, Name (vd01vol02)] mapping view:

CH ID LUN Access Host-Port-Identifier Nickname

-------------------------------------------------------------------------------

0,1 0 2 rw 10000000C9824E88 172_16_3_174

已经将vd01vol01，vd01vol02都映射给172_16_3_174

这里存储只写了一台的配置，另外一台同理

服务器端配置：

查看fc，这里如果是两块光纤卡，可以做多路径，之前的存储映射也要映射到多块卡，这里我只有host2一块

#cat /sys/class/fc_host/host2/port_name

0x10000000c9824e88

fdisk -l 看不到映射的存储

重新扫描

find /sys/class/scsi_host/host*/scan | while read line; do echo - - - > $line; done

cat /proc/partitions | awk '{print $4}' |grep sd

sda

sdb