[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 4.19.161AIMY-RK3568 (jenkins@jenkins-seafile-gitlab-60) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05), GNU ld (Linaro_Binutils-2017.05) 2.27.0.20161019) #1 SMP Fri Aug 18 13:47:19 CST 2023
[ 0.000000] Machine model: AIMY RK3568 DS68V01-S1-NONE
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e8000000, size 128 MiB
[ 0.000000] OF: reserved mem: initialized node rknpu, compatible id shared-dma-pool
[ 0.000000] cma: Reserved 16 MiB at 0x00000000e7000000
[ 0.000000] On node 0 totalpages: 980480
[ 0.000000] DMA32 zone: 15320 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 980480 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 23 pages/cpu s54248 r8192 d31768 u94208
[ 0.000000] pcpu-alloc: s54248 r8192 d31768 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 965160
[ 0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.verifiedbootstate=orange root=PARTUUID=22540000-0000-4a24-8000-633e00002a3e skip_initramfs androidboot.slot_suffix=_b androidboot.serialno=c3d9b8674f4b94f6 rw rootwait earlycon=uart8250,mmio32,0xfe660000 swiotlb=1 console=ttyFIQ0
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 3676368K/3921920K available (13374K kernel code, 2032K rwdata, 4600K rodata, 1600K init, 2422K bss, 98096K reserved, 147456K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 49290 entries in 193 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] ITS [mem 0xfd440000-0xfd45ffff]
[ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @e20f0000 (indirect, esz 8, psz 64K, shr 0)
[ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @e2100000 (flat, esz 2, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x00000000e2110000
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 0.000000] CPU0: using LPI pending table @0x00000000e2120000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] random: random: get_random_bytes called from start_kernel+0x36c/0x510 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002489] Console: colour dummy device 80x25
[ 0.002965] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.003976] pid_max: default: 32768 minimum: 301
[ 0.004713] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005415] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.008700] ASID allocator initialised with 32768 entries
[ 0.009445] rcu: Hierarchical SRCU implementation.
[ 0.013616] Platform MSI: interrupt-controller@fd440000 domain created
[ 0.014883] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[ 0.016746] smp: Bringing up secondary CPUs ...
[ 0.018334] Detected VIPT I-cache on CPU1
[ 0.018384] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[ 0.018453] CPU1: using LPI pending table @0x00000000e22c0000
[ 0.018521] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.019842] Detected VIPT I-cache on CPU2
[ 0.019888] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[ 0.019954] CPU2: using LPI pending table @0x00000000e2310000
[ 0.020012] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.021290] Detected VIPT I-cache on CPU3
[ 0.021333] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[ 0.021402] CPU3: using LPI pending table @0x00000000e2330000
[ 0.021458] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.021646] smp: Brought up 1 node, 4 CPUs
[ 0.028834] SMP: Total of 4 processors activated.
[ 0.029290] CPU features: detected: GIC system register CPU interface
[ 0.029926] CPU features: detected: Privileged Access Never
[ 0.030459] CPU features: detected: LSE atomic instructions
[ 0.031013] CPU features: detected: User Access Override
[ 0.031523] CPU features: detected: 32-bit EL0 Support
[ 0.032037] CPU features: detected: RAS Extension Support
[ 0.032815] CPU: All CPU(s) started at EL2
[ 0.033282] alternatives: patching kernel code
[ 0.043897] devtmpfs: initialized
[ 0.080513] Registered cp15_barrier emulation handler
[ 0.081057] Registered setend emulation handler
[ 0.081988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.082970] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.084781] pinctrl core: initialized pinctrl subsystem
[ 0.085847] regulator-dummy: no parameters
[ 0.086926] NET: Registered protocol family 16
[ 0.093464] cpuidle: using governor menu
[ 0.093891] Registered FIQ tty driver
[ 0.095203] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.098232] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.104592] console [pstore-1] enabled
[ 0.104959] pstore: Registered ramoops as persistent store backend
[ 0.105581] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.116680] platform fde40000.npu: assigned reserved memory node rknpu
[ 0.163757] rockchip-gpio fdd60000.gpio: probed gpio0 (fdd60000.gpio)
[ 0.165419] rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio)
[ 0.167038] rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio)
[ 0.168667] rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio)
[ 0.170264] rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio)
[ 0.171073] rockchip-pinctrl pinctrl: probed pinctrl
[ 0.193846] cryptd: max_cpu_qlen set to 1000
[ 0.196816] console [ttyFIQ0] enabled
[ 0.197518] bootconsole [uart8250] disabled
[ 0.198302] Registered fiq debugger ttyFIQ0
[ 0.200511] dc_12v: 12000 mV
[ 0.200850] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
[ 0.201080] vcc3v3_sys: 3300 mV
[ 0.201322] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
[ 0.201340] vcc3v3_sys: supplied by dc_12v
[ 0.201551] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
[ 0.201749] vcc5v0_sys: 5000 mV
[ 0.201984] reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
[ 0.202000] vcc5v0_sys: supplied by dc_12v
[ 0.202232] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
[ 0.202593] vcc5v0_host: no parameters
[ 0.202913] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
[ 0.203247] vcc5v0_otg: no parameters
[ 0.203600] reg-fixed-voltage vcc5v0-otg-regulator: vcc5v0_otg supplying 0uV
[ 0.203822] vcc3v3_lcd0_n: no parameters
[ 0.204177] reg-fixed-voltage vcc3v3-lcd0-n: vcc3v3_lcd0_n supplying 0uV
[ 0.204386] vcc3v3_lcd1_n: no parameters
[ 0.204731] reg-fixed-voltage vcc3v3-lcd1-n: vcc3v3_lcd1_n supplying 0uV
[ 0.204939] vcc2v5-sys: 2500 mV
[ 0.205214] reg-fixed-voltage vcc2v5-ddr: Looking up vin-supply from device tree
[ 0.205232] vcc2v5-sys: supplied by vcc3v3_sys
[ 0.205462] reg-fixed-voltage vcc2v5-ddr: vcc2v5-sys supplying 2500000uV
[ 0.205653] pcie30_avdd0v9: 900 mV
[ 0.205893] reg-fixed-voltage pcie30-avdd0v9: Looking up vin-supply from device tree
[ 0.205910] pcie30_avdd0v9: supplied by vcc3v3_sys
[ 0.206103] reg-fixed-voltage pcie30-avdd0v9: pcie30_avdd0v9 supplying 900000uV
[ 0.206318] pcie30_avdd1v8: 1800 mV
[ 0.206574] reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
[ 0.206590] pcie30_avdd1v8: supplied by vcc3v3_sys
[ 0.206796] reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
[ 0.207097] sata_power: no parameters
[ 0.207475] reg-fixed-voltage sata-power-regulator: sata_power supplying 0uV
[ 0.207669] vcc3v3_bu: 3300 mV
[ 0.207920] reg-fixed-voltage vcc3v3-bu: Looking up vin-supply from device tree
[ 0.207937] vcc3v3_bu: supplied by vcc5v0_sys
[ 0.208125] reg-fixed-voltage vcc3v3-bu: vcc3v3_bu supplying 3300000uV
[ 0.208941] pcie30_3v3: 32 <--> 3300 mV at 3300 mV
[ 0.210144] rk_iommu fdea0800.iommu: version = 2
[ 0.210801] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vpu-supply from device tree
[ 0.210836] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vpu-supply property in node /power-management@fdd90000/power-controller failed
[ 0.211113] rk_iommu fded0480.iommu: version = 2
[ 0.211544] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rga-supply from device tree
[ 0.211581] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rga-supply property in node /power-management@fdd90000/power-controller failed
[ 0.211915] rk_iommu fdee0800.iommu: version = 2
[ 0.212640] rk_iommu fdef0800.iommu: version = 2
[ 0.213263] rk_iommu fdf40f00.iommu: version = 2
[ 0.213773] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvenc-supply from device tree
[ 0.213808] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvenc-supply property in node /power-management@fdd90000/power-controller failed
[ 0.214061] rk_iommu fdf80800.iommu: version = 2
[ 0.214459] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvdec-supply from device tree
[ 0.214495] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvdec-supply property in node /power-management@fdd90000/power-controller failed
[ 0.214691] rk_iommu fe043e00.iommu: version = 2
[ 0.216126] SCSI subsystem initialized
[ 0.216245] libata version 3.00 loaded.
[ 0.216638] usbcore: registered new interface driver usbfs
[ 0.216778] usbcore: registered new interface driver hub
[ 0.216984] usbcore: registered new device driver usb
[ 0.217176] media: Linux media interface: v0.10
[ 0.217268] videodev: Linux video capture interface: v2.00
[ 0.217468] pps_core: LinuxPPS API ver. 1 registered
[ 0.217503] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.217563] PTP clock support registered
[ 0.221370] Advanced Linux Sound Architecture Driver Initialized.
[ 0.222263] Bluetooth: Core ver 2.22
[ 0.222348] NET: Registered protocol family 31
[ 0.222388] Bluetooth: HCI device and connection manager initialized
[ 0.222431] Bluetooth: HCI socket layer initialized
[ 0.222468] Bluetooth: L2CAP socket layer initialized
[ 0.222601] Bluetooth: SCO socket layer initialized
[ 0.223326] rockchip-cpuinfo cpuinfo: SoC : 35681000
[ 0.223370] rockchip-cpuinfo cpuinfo: Serial : 4d3db4515345ab97
[ 0.225145] clocksource: Switched to clocksource arch_sys_counter
[ 0.370120] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.370678] NET: Registered protocol family 2
[ 0.371710] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes)
[ 0.371878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.372389] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.373736] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.373963] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.374272] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.374793] NET: Registered protocol family 1
[ 0.375790] RPC: Registered named UNIX socket transport module.
[ 0.375829] RPC: Registered udp transport module.
[ 0.375856] RPC: Registered tcp transport module.
[ 0.375881] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.377013] PCI: CLS 0 bytes, default 64
[ 0.380238] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.384054] Initialise system trusted keyrings
[ 0.384430] workingset: timestamp_bits=45 max_order=20 bucket_order=0
[ 0.397982] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.399624] NFS: Registering the id_resolver key type
[ 0.399692] Key type id_resolver registered
[ 0.399711] Key type id_legacy registered
[ 0.399781] jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
[ 0.400269] fuse init (API version 7.27)
[ 0.400961] SGI XFS with security attributes, no debug enabled
[ 0.406326] NET: Registered protocol family 38
[ 0.406399] Key type asymmetric registered
[ 0.406419] Asymmetric key parser 'x509' registered
[ 0.406498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.406537] io scheduler noop registered
[ 0.406565] io scheduler deadline registered
[ 0.406808] io scheduler cfq registered (default)
[ 0.406848] io scheduler mq-deadline registered
[ 0.406878] io scheduler kyber registered
[ 0.410125] phy phy-fe850000.mipi-dphy.0: Looking up phy-supply from device tree
[ 0.410192] phy phy-fe850000.mipi-dphy.0: Looking up phy-supply property in node /mipi-dphy@fe850000 failed
[ 0.411696] phy phy-fe860000.mipi-dphy.1: Looking up phy-supply from device tree
[ 0.411715] phy phy-fe860000.mipi-dphy.1: Looking up phy-supply property in node /mipi-dphy@fe860000 failed
[ 0.414776] phy phy-fe8a0000.usb2-phy.2: Looking up phy-supply from device tree
[ 0.414812] vcc5v0_host: could not add device link phy-fe8a0000.usb2-phy.2 err -2
[ 0.414898] phy phy-fe8a0000.usb2-phy.2: Linked as a consumer to regulator.4
[ 0.415175] phy phy-fe8a0000.usb2-phy.3: Looking up phy-supply from device tree
[ 0.415195] phy phy-fe8a0000.usb2-phy.3: Looking up phy-supply property in node /usb2-phy@fe8a0000/otg-port failed
[ 0.415381] phy phy-fe8a0000.usb2-phy.3: Looking up vbus-supply from device tree
[ 0.415492] phy phy-fe8a0000.usb2-phy.3: Linked as a consumer to regulator.5
[ 0.417669] extcon extcon1: failed to create extcon usb2-phy link
[ 0.417776] phy phy-fe8b0000.usb2-phy.4: Looking up phy-supply from device tree
[ 0.417806] vcc5v0_host: could not add device link phy-fe8b0000.usb2-phy.4 err -2
[ 0.417912] phy phy-fe8b0000.usb2-phy.4: Linked as a consumer to regulator.4
[ 0.418183] phy phy-fe8b0000.usb2-phy.5: Looking up phy-supply from device tree
[ 0.418212] vcc5v0_host: could not add device link phy-fe8b0000.usb2-phy.5 err -2
[ 0.418285] phy phy-fe8b0000.usb2-phy.5: Linked as a consumer to regulator.4
[ 0.418454] phy phy-fe8b0000.usb2-phy.5: Looking up vbus-supply from device tree
[ 0.418471] phy phy-fe8b0000.usb2-phy.5: Looking up vbus-supply property in node /usb2-phy@fe8b0000/otg-port failed
[ 0.418503] phy phy-fe8b0000.usb2-phy.5: No vbus specified for otg port
[ 0.423654] phy phy-fe820000.phy.6: Looking up phy-supply from device tree
[ 0.423676] phy phy-fe820000.phy.6: Looking up phy-supply property in node /phy@fe820000 failed
[ 0.424513] phy phy-fe830000.phy.7: Looking up phy-supply from device tree
[ 0.424532] phy phy-fe830000.phy.7: Looking up phy-supply property in node /phy@fe830000 failed
[ 0.425275] phy phy-fe840000.phy.8: Looking up phy-supply from device tree
[ 0.425296] phy phy-fe840000.phy.8: Looking up phy-supply property in node /phy@fe840000 failed
[ 0.427253] phy phy-fe8c0000.phy.9: Looking up phy-supply from device tree
[ 0.427273] phy phy-fe8c0000.phy.9: Looking up phy-supply property in node /phy@fe8c0000 failed
[ 0.427460] rockchip-snps-pcie3-phy fe8c0000.phy: no p30x1 reset control specified
[ 0.427526] rockchip-snps-pcie3-phy fe8c0000.phy: no p30x2 reset control specified
[ 0.430274] func: rk_gpio_probe
[ 0.433437] rk-pcie 3c0800000.pcie: Looking up vpcie3v3-supply from device tree
[ 0.433641] rk-pcie 3c0800000.pcie: Linked as a consumer to regulator.13
[ 0.434523] mpp_service mpp-srv: d3468e455 author: beetom 2021-05-08 init project
[ 0.434568] mpp_service mpp-srv: probe start
[ 0.436300] iommu: Adding device fdf40000.rkvenc to group 4
[ 0.436375] mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to fdf40f00.iommu
[ 0.436724] mpp_rkvenc fdf40000.rkvenc: probing start
[ 0.437640] mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply from device tree
[ 0.437664] mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply property in node /rkvenc@fdf40000 failed
[ 0.437697] mpp_rkvenc fdf40000.rkvenc: no regulator, devfreq is disabled
[ 0.438415] mpp_rkvenc fdf40000.rkvenc: probing finish
[ 0.440656] iommu: Adding device fdea0400.vdpu to group 0
[ 0.440733] mpp_vdpu2 fdea0400.vdpu: Linked as a consumer to fdea0800.iommu
[ 0.441030] mpp_vdpu2 fdea0400.vdpu: probe device
[ 0.442107] mpp_vdpu2 fdea0400.vdpu: probing finish
[ 0.443170] iommu: Adding device fdee0000.vepu to group 2
[ 0.443244] mpp_vepu2 fdee0000.vepu: Linked as a consumer to fdee0800.iommu
[ 0.443561] mpp_vepu2 fdee0000.vepu: probe device
[ 0.444672] mpp_vepu2 fdee0000.vepu: probing finish
[ 0.445716] iommu: Adding device fdef0000.iep to group 3
[ 0.445776] rk-pcie 3c0800000.pcie: Missing *config* reg space
[ 0.445792] mpp-iep2 fdef0000.iep: Linked as a consumer to fdef0800.iommu
[ 0.445857] rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
[ 0.445928] rk-pcie 3c0800000.pcie: err 0x380000000..0x3807fffff -> 0x80000000
[ 0.445977] rk-pcie 3c0800000.pcie: IO 0x380800000..0x3808fffff -> 0x80800000
[ 0.446027] rk-pcie 3c0800000.pcie: MEM 0x380900000..0x3bfffffff -> 0x80900000
[ 0.446062] mpp-iep2 fdef0000.iep: probe device
[ 0.447006] mpp-iep2 fdef0000.iep: allocate roi buffer failed
[ 0.447388] mpp-iep2 fdef0000.iep: probing finish
[ 0.448398] iommu: Adding device fded0000.jpegd to group 1
[ 0.448472] mpp_jpgdec fded0000.jpegd: Linked as a consumer to fded0480.iommu
[ 0.448732] mpp_jpgdec fded0000.jpegd: probe device
[ 0.449813] mpp_jpgdec fded0000.jpegd: probing finish
[ 0.450789] iommu: Adding device fdf80200.rkvdec to group 5
[ 0.450862] mpp_rkvdec2 fdf80200.rkvdec: Linked as a consumer to fdf80800.iommu
[ 0.451332] mpp_rkvdec2 fdf80200.rkvdec: probing start
[ 0.452108] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[ 0.452187] rkvdec_init:709: No niu aclk reset resource define
[ 0.452229] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[ 0.452256] rkvdec_init:712: No niu hclk reset resource define
[ 0.452780] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000, rcb_iova 0x0000000010000000, sram_size 49152, rcb_size=65536
[ 0.452850] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[ 0.453479] mpp_service mpp-srv: probe success
[ 0.461854] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
[ 0.461913] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 0.466656] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
[ 0.466707] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 0.470368] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 0.472077] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 0.473615] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 64, base_baud = 1500000) is a 16550A
[ 0.474599] fe670000.serial: ttyS3 at MMIO 0xfe670000 (irq = 65, base_baud = 1500000) is a 16550A
[ 0.475519] fe680000.serial: ttyS4 at MMIO 0xfe680000 (irq = 66, base_baud = 1500000) is a 16550A
[ 0.476426] fe690000.serial: ttyS5 at MMIO 0xfe690000 (irq = 67, base_baud = 1500000) is a 16550A
[ 0.481061] random: fast init done
[ 0.481456] random: crng init done
[ 0.483369] iommu: Adding device fe040000.vop to group 6
[ 0.483450] rockchip-vop2 fe040000.vop: Linked as a consumer to fe043e00.iommu
[ 0.495166] rockchip-drm display-subsystem: Linked as a consumer to fe040000.vop
[ 0.497678] rockchip-drm display-subsystem: Linked as a consumer to fe0a0000.hdmi
[ 0.498670] rockchip-drm display-subsystem: Linked as a consumer to fe060000.dsi
[ 0.498728] rockchip-drm display-subsystem: Linked as a consumer to fe070000.dsi
[ 0.501587] rockchip-drm display-subsystem: devfreq is not set
[ 0.502425] [drm] unsupported AFBC format[3432564e]
[ 0.503251] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008e67078)
[ 0.503625] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 0.504711] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 0.505827] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffff8008e6a938)
[ 0.505978] dw-mipi-dsi fe060000.dsi: [drm:dw_mipi_dsi_bind] *ERROR* Failed to find panel or bridge: -517
[ 0.515477] panel-simple-dsi fe060000.dsi.0: Looking up power-supply from device tree
[ 0.515601] panel-simple-dsi fe060000.dsi.0: Linked as a consumer to regulator.6
[ 0.515655] panel-simple-dsi fe060000.dsi.0: Looking up vsp-supply from device tree
[ 0.515689] panel-simple-dsi fe060000.dsi.0: Looking up vsp-supply property in node /dsi@fe060000/panel@0 failed
[ 0.515722] panel-simple-dsi fe060000.dsi.0: fe060000.dsi.0 supply vsp not found, using dummy regulator
[ 0.515853] panel-simple-dsi fe060000.dsi.0: Linked as a consumer to regulator.0
[ 0.515897] panel-simple-dsi fe060000.dsi.0: Looking up vsn-supply from device tree
[ 0.515926] panel-simple-dsi fe060000.dsi.0: Looking up vsn-supply property in node /dsi@fe060000/panel@0 failed
[ 0.515951] panel-simple-dsi fe060000.dsi.0: fe060000.dsi.0 supply vsn not found, using dummy regulator
[ 0.516396] panel-simple-dsi fe070000.dsi.0: Looking up power-supply from device tree
[ 0.516502] panel-simple-dsi fe070000.dsi.0: Linked as a consumer to regulator.7
[ 0.516552] panel-simple-dsi fe070000.dsi.0: Looking up vsp-supply from device tree
[ 0.516578] panel-simple-dsi fe070000.dsi.0: Looking up vsp-supply property in node /dsi@fe070000/panel@0 failed
[ 0.516606] panel-simple-dsi fe070000.dsi.0: fe070000.dsi.0 supply vsp not found, using dummy regulator
[ 0.516737] panel-simple-dsi fe070000.dsi.0: Linked as a consumer to regulator.0
[ 0.516765] panel-simple-dsi fe070000.dsi.0: Looking up vsn-supply from device tree
[ 0.516791] panel-simple-dsi fe070000.dsi.0: Looking up vsn-supply property in node /dsi@fe070000/panel@0 failed
[ 0.516815] panel-simple-dsi fe070000.dsi.0: fe070000.dsi.0 supply vsn not found, using dummy regulator
[ 0.518245] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_gpu-supply from device tree
[ 0.518281] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_gpu-supply property in node /power-management@fdd90000/power-controller failed
[ 0.518355] mali fde60000.gpu: Kernel DDK version g2p0-01eac0
[ 0.518485] mali fde60000.gpu: Looking up mali-supply from device tree
[ 0.518517] mali fde60000.gpu: Power management initialization failed error = -517
[ 0.518576] mali fde60000.gpu: Device initialization Deferred
[ 0.519403] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.520685] brd: module loaded
[ 0.533798] loop: module loaded
[ 0.534704] zram: Added device: zram0
[ 0.534956] lkdtm: No crash points registered, enable through debugfs
[ 0.537295] ahci fc800000.sata: Looking up target-supply from device tree
[ 0.537316] ahci fc800000.sata: Looking up target-supply property in node /sata@fc800000 failed
[ 0.537482] ahci fc800000.sata: forcing port_map 0x0 -> 0x1
[ 0.537590] ahci fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 0.537632] ahci fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
[ 0.537679] ahci fc800000.sata: port 0 is not capable of FBS
[ 0.539543] scsi host0: ahci
[ 0.540288] ata1: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x100 irq 10
[ 0.543749] libphy: Fixed MDIO Bus: probed
[ 0.543846] CAN device driver interface
[ 0.549032] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply from device tree
[ 0.549067] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply property in node /ethernet@fe010000 failed
[ 0.549100] rk_gmac-dwmac fe010000.ethernet: no regulator found
[ 0.549201] rk_gmac-dwmac fe010000.ethernet: clock input or output? (output).
[ 0.549229] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
[ 0.549314] rk_gmac-dwmac fe010000.ethernet: RX delay(0x26).
[ 0.549359] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[ 0.554514] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[ 0.554929] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 0.554971] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
[ 0.555006] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[ 0.555036] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[ 0.555067] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[ 0.555094] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[ 0.555204] rk_gmac-dwmac fe010000.ethernet: TSO supported
[ 0.555251] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 0.555290] rk_gmac-dwmac fe010000.ethernet: rk_get_eth_addr: mac address: 4c:3f:53:45:ab:97
[ 0.555320] rk_gmac-dwmac fe010000.ethernet: device MAC address 4c:3f:53:45:ab:97
[ 0.555351] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[ 0.680200] libphy: stmmac: probed
[ 0.685112] PPP generic driver version 2.4.2
[ 0.685502] PPP BSD Compression module registered
[ 0.685540] PPP Deflate Compression module registered
[ 0.685610] PPP MPPE Compression module registered
[ 0.685643] NET: Registered protocol family 24
[ 0.686190] usbcore: registered new interface driver rndis_wlan
[ 0.686310] usbcore: registered new interface driver rtl8150
[ 0.686420] usbcore: registered new interface driver r8152
[ 0.686531] usbcore: registered new interface driver asix
[ 0.686644] usbcore: registered new interface driver ax88179_178a
[ 0.686748] usbcore: registered new interface driver cdc_ether
[ 0.686835] usbcore: registered new interface driver cdc_eem
[ 0.686937] usbcore: registered new interface driver rndis_host
[ 0.687078] usbcore: registered new interface driver cdc_ncm
[ 0.687224] usbcore: registered new interface driver cdc_mbim
[ 0.689385] dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2
[ 0.693958] dwc3 fd000000.dwc3: Failed to get clk 'ref': -2
[ 0.700608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.700674] ehci-pci: EHCI PCI platform driver
[ 0.700801] ehci-platform: EHCI generic platform driver
[ 0.703345] ehci-platform fd800000.usb: EHCI Host Controller
[ 0.703727] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[ 0.704348] ehci-platform fd800000.usb: irq 11, io mem 0xfd800000
[ 0.711214] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[ 0.711692] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.711733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.711773] usb usb1: Product: EHCI Host Controller
[ 0.711795] usb usb1: Manufacturer: Linux 4.19.161AIMY-RK3568 ehci_hcd
[ 0.711824] usb usb1: SerialNumber: fd800000.usb
[ 0.712780] hub 1-0:1.0: USB hub found
[ 0.712901] hub 1-0:1.0: 1 port detected
[ 0.716059] ehci-platform fd880000.usb: EHCI Host Controller
[ 0.716477] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[ 0.717252] ehci-platform fd880000.usb: irq 13, io mem 0xfd880000
[ 0.724217] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[ 0.724686] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.724729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724770] usb usb2: Product: EHCI Host Controller
[ 0.724791] usb usb2: Manufacturer: Linux 4.19.161AIMY-RK3568 ehci_hcd
[ 0.724819] usb usb2: SerialNumber: fd880000.usb
[ 0.725742] hub 2-0:1.0: USB hub found
[ 0.725846] hub 2-0:1.0: 1 port detected
[ 0.727326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.727392] ohci-platform: OHCI generic platform driver
[ 0.727836] ohci-platform fd840000.usb: Generic Platform OHCI controller
[ 0.728244] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[ 0.728756] ohci-platform fd840000.usb: irq 12, io mem 0xfd840000
[ 0.784607] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 0.784650] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.784672] usb usb3: Product: Generic Platform OHCI controller
[ 0.784691] usb usb3: Manufacturer: Linux 4.19.161AIMY-RK3568 ohci_hcd
[ 0.784711] usb usb3: SerialNumber: fd840000.usb
[ 0.785665] hub 3-0:1.0: USB hub found
[ 0.785766] hub 3-0:1.0: 1 port detected
[ 0.786792] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[ 0.787178] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
[ 0.787681] ohci-platform fd8c0000.usb: irq 14, io mem 0xfd8c0000
[ 0.843521] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 0.843567] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.843589] usb usb4: Product: Generic Platform OHCI controller
[ 0.843610] usb usb4: Manufacturer: Linux 4.19.161AIMY-RK3568 ohci_hcd
[ 0.843629] usb usb4: SerialNumber: fd8c0000.usb
[ 0.844531] hub 4-0:1.0: USB hub found
[ 0.844639] hub 4-0:1.0: 1 port detected
[ 0.846010] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.847823] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.848271] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 0.849258] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000001002010010
[ 0.849384] xhci-hcd xhci-hcd.0.auto: irq 80, io mem 0xfcc00000
[ 0.850051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.850093] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.850160] usb usb5: Product: xHCI Host Controller
[ 0.850184] usb usb5: Manufacturer: Linux 4.19.161AIMY-RK3568 xhci-hcd
[ 0.850226] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 0.851117] hub 5-0:1.0: USB hub found
[ 0.851258] hub 5-0:1.0: 1 port detected
[ 0.851959] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.852347] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 0.852407] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.852585] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.852878] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.852919] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.852949] usb usb6: Product: xHCI Host Controller
[ 0.852979] usb usb6: Manufacturer: Linux 4.19.161AIMY-RK3568 xhci-hcd
[ 0.853008] usb usb6: SerialNumber: xhci-hcd.0.auto
[ 0.853916] hub 6-0:1.0: USB hub found
[ 0.854023] hub 6-0:1.0: 1 port detected
[ 0.855068] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.855476] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 0.856467] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000001002010010
[ 0.856615] xhci-hcd xhci-hcd.1.auto: irq 81, io mem 0xfd000000
[ 0.857305] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.857333] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.857355] usb usb7: Product: xHCI Host Controller
[ 0.857399] usb usb7: Manufacturer: Linux 4.19.161AIMY-RK3568 xhci-hcd
[ 0.857429] usb usb7: SerialNumber: xhci-hcd.1.auto
[ 0.858331] hub 7-0:1.0: USB hub found
[ 0.858433] hub 7-0:1.0: 1 port detected
[ 0.859117] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.859529] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 0.859591] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 0.859765] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.860048] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.860089] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.860121] usb usb8: Product: xHCI Host Controller
[ 0.860193] usb usb8: Manufacturer: Linux 4.19.161AIMY-RK3568 xhci-hcd
[ 0.860222] usb usb8: SerialNumber: xhci-hcd.1.auto
[ 0.861085] hub 8-0:1.0: USB hub found
[ 0.861219] hub 8-0:1.0: 1 port detected
[ 0.862256] usbcore: registered new interface driver cdc_acm
[ 0.862292] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.862422] usbcore: registered new interface driver cdc_wdm
[ 0.862929] usbcore: registered new interface driver uas
[ 0.863320] usbcore: registered new interface driver usb-storage
[ 0.863527] usbcore: registered new interface driver usbserial_generic
[ 0.863606] usbserial: USB Serial support registered for generic
[ 0.863735] usbcore: registered new interface driver ch341
[ 0.863806] usbserial: USB Serial support registered for ch341-uart
[ 0.863939] usbcore: registered new interface driver cp210x
[ 0.864012] usbserial: USB Serial support registered for cp210x
[ 0.864264] usbcore: registered new interface driver ftdi_sio
[ 0.864326] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.864921] usbcore: registered new interface driver keyspan
[ 0.864996] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 0.865070] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 0.865162] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 0.865256] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 0.865405] usbcore: registered new interface driver option
[ 0.865477] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.866339] usbcore: registered new interface driver oti6858
[ 0.866418] usbserial: USB Serial support registered for oti6858
[ 0.866531] usbcore: registered new interface driver pl2303
[ 0.866605] usbserial: USB Serial support registered for pl2303
[ 0.866770] usbcore: registered new interface driver qcserial
[ 0.866844] usbserial: USB Serial support registered for Qualcomm USB modem
[ 0.867056] usbcore: registered new interface driver sierra
[ 0.867167] usbserial: USB Serial support registered for Sierra USB modem
[ 0.869909] usbcore: registered new interface driver usbtouchscreen
[ 0.870058] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0
[ 0.870096] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0
[ 0.870525] .. rk pwm remotectl v1.1 init
[ 0.871050] input: fdd70030.pwm as /devices/platform/fdd70030.pwm/input/input0
[ 0.872813] i2c /dev entries driver
[ 0.874767] fan53555-regulator 0-001c: Failed to get chip ID!
[ 0.876455] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.877007] vdd_cpu: override max_uV, 1390000 -> 1387500
[ 0.879687] vdd_cpu: 712 <--> 1387 mV at 1000 mV
[ 0.880490] fan53555-regulator 0-0040: Looking up vin-supply from device tree
[ 0.880511] vdd_cpu: supplied by vcc5v0_sys
[ 0.882911] rk808 0-0020: chip id: 0x8090
[ 0.883019] rk808 0-0020: No cache defaults, reading back from HW
[ 0.906916] rk808 0-0020: source: on=0x80, off=0x00
[ 0.906969] rk808 0-0020: support dcdc3 fb mode:-22, 63
[ 0.907372] rk808 0-0020: support pmic reset mode:0,0
[ 0.915289] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.915381] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.915911] vdd_logic: 500 <--> 1350 mV at 900 mV
[ 0.916336] rk808 0-0020: Looking up vcc1-supply from device tree
[ 0.916357] vdd_logic: supplied by vcc3v3_sys
[ 0.917072] vdd_gpu: 500 <--> 1350 mV at 900 mV
[ 0.917412] rk808 0-0020: Looking up vcc2-supply from device tree
[ 0.917430] vdd_gpu: supplied by vcc3v3_sys
[ 0.917766] vcc_ddr: at 500 mV
[ 0.918052] rk808 0-0020: Looking up vcc3-supply from device tree
[ 0.918070] vcc_ddr: supplied by vcc3v3_sys
[ 0.918462] vdd_npu: 500 <--> 1350 mV at 900 mV
[ 0.918752] rk808 0-0020: Looking up vcc4-supply from device tree
[ 0.918769] vdd_npu: supplied by vcc3v3_sys
[ 0.919512] vcc_1v8: 1800 mV
[ 0.919803] rk808 0-0020: Looking up vcc9-supply from device tree
[ 0.919823] vcc_1v8: supplied by vcc3v3_sys
[ 0.920194] vdda0v9_image: 900 mV
[ 0.920473] rk808 0-0020: Looking up vcc5-supply from device tree
[ 0.920490] vdda0v9_image: supplied by vcc3v3_sys
[ 0.921219] vdda_0v9: 900 mV
[ 0.921498] rk808 0-0020: Looking up vcc5-supply from device tree
[ 0.921515] vdda_0v9: supplied by vcc3v3_sys
[ 0.921844] vdda0v9_pmu: 900 mV
[ 0.922116] rk808 0-0020: Looking up vcc5-supply from device tree
[ 0.922182] vdda0v9_pmu: supplied by vcc3v3_sys
[ 0.922513] vccio_acodec: 3300 mV
[ 0.922791] rk808 0-0020: Looking up vcc6-supply from device tree
[ 0.922807] vccio_acodec: supplied by vcc3v3_sys
[ 0.923498] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[ 0.923809] rk808 0-0020: Looking up vcc6-supply from device tree
[ 0.923827] vccio_sd: supplied by vcc3v3_sys
[ 0.924198] vcc3v3_pmu: 3300 mV
[ 0.924473] rk808 0-0020: Looking up vcc6-supply from device tree
[ 0.924491] vcc3v3_pmu: supplied by vcc3v3_sys
[ 0.925215] vcca_1v8: 1800 mV
[ 0.925502] rk808 0-0020: Looking up vcc7-supply from device tree
[ 0.925520] vcca_1v8: supplied by vcc3v3_sys
[ 0.925855] vcca1v8_pmu: 1800 mV
[ 0.926183] rk808 0-0020: Looking up vcc7-supply from device tree
[ 0.926200] vcca1v8_pmu: supplied by vcc3v3_sys
[ 0.926547] vcca1v8_image: 1800 mV
[ 0.926828] rk808 0-0020: Looking up vcc7-supply from device tree
[ 0.926845] vcca1v8_image: supplied by vcc3v3_sys
[ 0.927607] vcc_3v3: no parameters
[ 0.927867] rk808 0-0020: Looking up vcc9-supply from device tree
[ 0.927884] vcc_3v3: supplied by vcc3v3_sys
[ 0.928617] vcc3v3_sd: no parameters
[ 0.928904] rk808 0-0020: Looking up vcc8-supply from device tree
[ 0.928921] vcc3v3_sd: supplied by vcc3v3_sys
[ 0.929488] rk817-battery rk817-battery: Failed to find matching dt id
[ 0.929906] rk817-charger rk817-charger: Failed to find matching dt id
[ 0.933755] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1
[ 0.937895] <<GTP-INF>>[gt1x_ts_probe:537] GTP Driver Version: V1.4<2015/07/10>
[ 0.937948] <<GTP-INF>>[gt1x_ts_probe:538] GTP I2C Address: 0x14
[ 0.938027] Goodix-TS-GT1X 1-0014: Looking up vdd_ana-supply from device tree
[ 0.938044] Goodix-TS-GT1X 1-0014: Looking up vdd_ana-supply property in node /i2c@fe5a0000/gt1x@14 failed
[ 0.938100] <<GTP-ERR>>[gt1x_parse_dt:334] vdd_ana not specified, fallback to power-supply
[ 0.938173] Goodix-TS-GT1X 1-0014: Looking up power-supply from device tree
[ 0.938303] Goodix-TS-GT1X 1-0014: Linked as a consumer to regulator.6
[ 0.938470] <<GTP-INF>>[gt1x_reset_guitar:784] GTP RESET!
[ 0.948341] rtc-hym8563 5-0051: rtc core: registered hym8563 as rtc0
[ 0.949466] rtc-hym8563 5-0051: setting system clock to 2023-09-27 05:38:44 UTC (1695793124)
[ 0.955510] usbcore: registered new interface driver uvcvideo
[ 0.955557] USB Video Class driver (1.1.1)
[ 0.955966] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
[ 0.956187] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.25
[ 0.956256] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
[ 0.956395] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
[ 0.956512] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.23
[ 0.956569] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
[ 0.956593] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply property in node /syscon@fdc20000/io-domains failed
[ 0.956648] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
[ 0.956775] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.24
[ 0.956834] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
[ 0.956978] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.19
[ 0.957036] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
[ 0.957214] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.29
[ 0.957273] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
[ 0.957396] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
[ 0.965084] rockchip-thermal fe710000.tsadc: tsadc is probed successfully!
[ 0.967499] Bluetooth: HCI UART driver ver 2.3
[ 0.967546] Bluetooth: HCI UART protocol H4 registered
[ 0.967565] Bluetooth: HCI UART protocol ATH3K registered
[ 0.967716] usbcore: registered new interface driver bfusb
[ 0.967878] usbcore: registered new interface driver btusb
[ 0.968537] cpu cpu0: leakage=25
[ 0.968597] cpu cpu0: Failed to get clk
[ 0.970783] sdhci: Secure Digital Host Controller Interface driver
[ 0.970823] sdhci: Copyright(c) Pierre Ossman
[ 0.970841] Synopsys Designware Multimedia Card Interface Driver
[ 0.972728] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.973295] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.
[ 0.973331] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a
[ 0.973477] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo
[ 0.973549] dwmmc_rockchip fe2b0000.dwmmc: Looking up vmmc-supply from device tree
[ 0.973723] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.30
[ 0.973772] dwmmc_rockchip fe2b0000.dwmmc: Looking up vqmmc-supply from device tree
[ 0.973923] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.24
[ 0.987646] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 1.001355] dwmmc_rockchip fe2c0000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.002336] dwmmc_rockchip fe2c0000.dwmmc: Using internal DMA controller.
[ 1.002388] dwmmc_rockchip fe2c0000.dwmmc: Version ID is 270a
[ 1.002488] dwmmc_rockchip fe2c0000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo
[ 1.002570] dwmmc_rockchip fe2c0000.dwmmc: Looking up vmmc-supply from device tree
[ 1.002593] dwmmc_rockchip fe2c0000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe2c0000 failed
[ 1.002653] dwmmc_rockchip fe2c0000.dwmmc: Looking up vqmmc-supply from device tree
[ 1.002668] dwmmc_rockchip fe2c0000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe2c0000 failed
[ 1.002808] dwmmc_rockchip fe2c0000.dwmmc: allocated mmc-pwrseq
[ 1.002852] mmc_host mmc1: card is non-removable.
[ 1.013541] <<GTP-ERR>>[gt1x_init:2324] Check main system not pass[0x 0].
[ 1.020780] <<GTP-ERR>>[gt1x_init:2341] Init failed, use default setting
[ 1.028596] <<GTP-ERR>>[gt1x_init:2351] Get chip type failed!
[ 1.037948] <<GTP-ERR>>[gt1x_read_version:838] Read version failed!(checksum error)
[ 1.153550] <<GTP-ERR>>[gt1x_read_version:838] Read version failed!(checksum error)
[ 1.171212] usb 5-1: new low-speed USB device number 2 using xhci-hcd
[ 1.224771] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 1.237998] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.240063] sdhci-dwcmshc fe310000.sdhci: Looking up vmmc-supply from device tree
[ 1.240084] sdhci-dwcmshc fe310000.sdhci: Looking up vmmc-supply property in node /sdhci@fe310000 failed
[ 1.240186] sdhci-dwcmshc fe310000.sdhci: Looking up vqmmc-supply from device tree
[ 1.240204] sdhci-dwcmshc fe310000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe310000 failed
[ 1.240249] mmc2: Unknown controller version (5). You may experience problems.
[ 1.265540] <<GTP-ERR>>[gt1x_read_version:838] Read version failed!(checksum error)
[ 1.272239] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.272891] mmc2: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA
[ 1.274059] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.274530] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 1.275881] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.276368] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.277198] usbcore: registered new interface driver usbhid
[ 1.277240] usbhid: USB HID core driver
[ 1.279312] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.283171] rockchip-saradc fe720000.saradc: Looking up vref-supply from device tree
[ 1.283346] rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.26
[ 1.283438] mmc1: queuing unknown CIS tuple 0x8e (9 bytes)
[ 1.284840] rksfc_base v1.1 2016-01-08
[ 1.285937] rksfc fe300000.sfc: rksfc_probe clk rate = 99000000
[ 1.286088] rkflash_dev_init enter
[ 1.286177] sfc nor id: 0 0 0
[ 1.286211] rkflash[1] is invalid
[ 1.286215] rkflash_dev_init enter
[ 1.286298] sfc_nand id: 0 0 0
[ 1.286325] rkflash[2] is invalid
[ 1.287964] usbcore: registered new interface driver snd-usb-audio
[ 1.293168] rk817-codec rk817-codec: DMA mask not set
[ 1.300378] rockchip-i2s-tdm fe400000.i2s: playback channel(2~8), capture channel(0~8)
[ 1.301435] rockchip-i2s-tdm fe410000.i2s: playback channel(2~8), capture channel(2~8)
[ 1.302477] rockchip-i2s-tdm fe430000.i2s: playback channel(2~8), capture channel(2~8)
[ 1.303671] usb 5-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.02
[ 1.303719] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.303742] usb 5-1: Product: USB Keyboard
[ 1.303760] usb 5-1: Manufacturer: Logitech
[ 1.310990] mmc2: new HS200 MMC card at address 0001
[ 1.312306] Initializing XFRM netlink socket
[ 1.312797] mmcblk2: mmc2:0001 SPeMMC 29.0 GiB
[ 1.313722] NET: Registered protocol family 10
[ 1.313741] mmcblk2boot0: mmc2:0001 SPeMMC partition 1 4.00 MiB
[ 1.314727] mmcblk2boot1: mmc2:0001 SPeMMC partition 2 4.00 MiB
[ 1.315317] mmcblk2rpmb: mmc2:0001 SPeMMC partition 3 4.00 MiB, chardev (239:0)
[ 1.315859] Segment Routing with IPv6
[ 1.316095] NET: Registered protocol family 17
[ 1.316212] NET: Registered protocol family 15
[ 1.316234] can: controller area network core (rev 20170425 abi 9)
[ 1.316549] NET: Registered protocol family 29
[ 1.316594] can: raw protocol (rev 20170425)
[ 1.316613] can: broadcast manager protocol (rev 20170425 t)
[ 1.316646] can: netlink gateway (rev 20170425) max_hops=1
[ 1.317098] Bluetooth: RFCOMM TTY layer initialized
[ 1.317187] Bluetooth: RFCOMM socket layer initialized
[ 1.317242] Bluetooth: RFCOMM ver 1.11
[ 1.317294] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.317326] Bluetooth: BNEP filters: protocol multicast
[ 1.317366] Bluetooth: BNEP socket layer initialized
[ 1.317395] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.317429] Bluetooth: HIDP socket layer initialized
[ 1.317511] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.317544] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.318470] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.318578] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6398s
[ 1.318599] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.318615] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.318738] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 74, flags = 0.
[ 1.318781] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 1.318809] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.318828] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[ 1.318864] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.320023] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 77.
[ 1.320115] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 79.
[ 1.320208] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 81.
[ 1.320268] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 80.
[ 1.320421] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.320611] [BT_RFKILL]: ** disable irq
[ 1.320850] [BT_RFKILL]: bt_default device registered.
[ 1.321204] Key type dns_resolver registered
[ 1.321399] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.321732] flash vendor_init_thread!
[ 1.321754] flash vendor storage:20170308 ret = -1
[ 1.325247] Loading compiled-in X.509 certificates
[ 1.326455] pstore: Using compression: deflate
[ 1.328015] rga2: Driver loaded successfully ver:3.02
[ 1.328687] rga2: Module initialized.
[ 1.334248] usb 4-1: new full-speed USB device number 2 using ohci-platform
[ 1.352258] vendor storage:20190527 ret = 0
[ 1.366561] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.368201] <<GTP-INF>>[gt1x_read_version:859] IC VERSION:GT_000000(Patch)_0000(Mask)_00(SensorID)
[ 1.368245] <<GTP-INF>>[gt1x_init_panel:604] Config group0 used, length:239
[ 1.368267] <<GTP-INF>>[gt1x_init_panel:655] X_MAX=4096,Y_MAX=4096,TRIGGER=0x01,WAKEUP_LEVEL=1
[ 1.399099] rockchip-drm display-subsystem: devfreq is not set
[ 1.400764] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008e67078)
[ 1.401188] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.402662] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.405729] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffff8008e6a938)
[ 1.405920] rockchip-drm display-subsystem: bound fe060000.dsi (ops 0xffffff8008e6b870)
[ 1.405973] rockchip-drm display-subsystem: bound fe070000.dsi (ops 0xffffff8008e6b870)
[ 1.406012] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.406039] [drm] No driver support for vblank timestamp query.
[ 1.406347] rockchip-drm display-subsystem: failed to parse loader memory
[ 1.423480] rockchip-vop2 fe040000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 16 for vp1
[ 1.424075] dw-mipi-dsi fe060000.dsi: [drm:dw_mipi_dsi_encoder_enable] final DSI-Link bandwidth: 1000 x 8 Mbps
[ 1.424363] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.427125] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[ 1.427961] mali fde60000.gpu: Kernel DDK version g2p0-01eac0
[ 1.428168] mali fde60000.gpu: Looking up mali-supply from device tree
[ 1.428313] mali fde60000.gpu: Linked as a consumer to regulator.16
[ 1.428362] mali fde60000.gpu: Looking up shadercores-supply from device tree
[ 1.428384] mali fde60000.gpu: Looking up shadercores-supply property in node /gpu@fde60000 failed
[ 1.428528] mali fde60000.gpu: Dropping the link to regulator.16
[ 1.428594] mali fde60000.gpu: Power management initialization failed error = -517
[ 1.428657] mali fde60000.gpu: Device initialization Deferred
[ 1.430462] input: adc-keys as /devices/platform/adc-keys/input/input2
[ 1.434096] rockchip-dmc dmc: Looking up center-supply from device tree
[ 1.434283] rockchip-dmc dmc: Linked as a consumer to regulator.15
[ 1.434381] rockchip-dmc dmc: current ATF version 0x100
[ 1.435688] rockchip-dmc dmc: Failed to get ddr_leakage
[ 1.435747] rockchip-dmc dmc: Looking up center-supply from device tree
[ 1.435799] vdd_logic: could not add device link dmc err -17
[ 1.435818] vdd_logic: Failed to create debugfs directory
[ 1.435839] rockchip-dmc dmc: Failed to get pvtm
[ 1.436179] rockchip-dmc dmc: avs=0
[ 1.436255] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[ 1.436278] rockchip-dmc dmc: failed to get vop pn to msch rl
[ 1.436590] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 1.436674] rockchip-dmc dmc: could not find power_model node
[ 1.439336] asoc-simple-card hdmi-sound: i2s-hifi <-> fe400000.i2s mapping ok
[ 1.443700] asoc-simple-card dummy-sound1: dummy-codec1 <-> fe410000.i2s mapping ok
[ 1.448627] asoc-simple-card dummy-sound3: dummy-codec3 <-> fe430000.i2s mapping ok
[ 1.452534] asoc-simple-card spdif-sound: dit-hifi <-> fe460000.spdif mapping ok
[ 1.454863] mali fde60000.gpu: Kernel DDK version g2p0-01eac0
[ 1.455065] mali fde60000.gpu: Looking up mali-supply from device tree
[ 1.455245] mali fde60000.gpu: Linked as a consumer to regulator.16
[ 1.455292] mali fde60000.gpu: Looking up shadercores-supply from device tree
[ 1.455315] mali fde60000.gpu: Looking up shadercores-supply property in node /gpu@fde60000 failed
[ 1.455438] mali fde60000.gpu: Looking up mali-supply from device tree
[ 1.455489] vdd_gpu: could not add device link fde60000.gpu err -17
[ 1.455505] vdd_gpu: Failed to create debugfs directory
[ 1.455525] mali fde60000.gpu: Looking up shadercores-supply from device tree
[ 1.455545] mali fde60000.gpu: Looking up shadercores-supply property in node /gpu@fde60000 failed
[ 1.455587] mali fde60000.gpu: dev_pm_opp_set_regulators: no regulator (shadercores) found: -19
[ 1.455766] mali fde60000.gpu: leakage=8
[ 1.455823] mali fde60000.gpu: Looking up mali-supply from device tree
[ 1.455874] vdd_gpu: Failed to create debugfs directory
[ 1.455896] mali fde60000.gpu: Failed to get pvtm
[ 1.456998] mali fde60000.gpu: avs=0
[ 1.457053] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 112; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[ 1.457692] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[ 1.458403] mali fde60000.gpu: No memory group manager is configured
[ 1.459395] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 1.460734] mali fde60000.gpu: Probed as mali0
[ 1.461245] cpu cpu0: Looking up cpu0-supply from device tree
[ 1.461291] cpu cpu0: Looking up cpu1-supply from device tree
[ 1.461912] cpu cpu0: Linked as a consumer to regulator.14
[ 1.462036] cpu cpu0: Dropping the link to regulator.14
[ 1.462288] cpu cpu0: Looking up cpu0-supply from device tree
[ 1.462328] cpu cpu0: Looking up cpu1-supply from device tree
[ 1.462922] cpu cpu0: Linked as a consumer to regulator.14
[ 1.464188] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 1.464385] cpu cpu0: avs=0
[ 1.464528] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 1.469608] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vi-supply from device tree
[ 1.469630] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vi-supply property in node /power-management@fdd90000/power-controller failed
[ 1.471480] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.472734] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.473318] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.473336] cfg80211: failed to load regulatory.db
[ 1.473742] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '13:47:41', on 'Aug 18 2023'.
[ 1.474183] Mali:
[ 1.474184] Mali device driver loaded
[ 1.545238] usb 4-1: New USB device found, idVendor=0483, idProduct=5764, bcdDevice= 2.00
[ 1.545255] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.545262] usb 4-1: Product: AAM X-DVNCE HID
[ 1.545269] usb 4-1: Manufacturer: AIMYUNIONTECHNOLOGY
[ 1.545275] usb 4-1: SerialNumber: N32g45x
[ 1.554090] hid-generic 0003:0483:5764.0001: hiddev96,hidraw0: USB HID v1.10 Device [AIMYUNIONTECHNOLOGY AAM X-DVNCE HID] on usb-fd8c0000.usb-1/input0
[ 1.601523] input: goodix-ts as /devices/virtual/input/input3
[ 1.631982] input: Logitech USB Keyboard as /devices/platform/usbdrd/fcc00000.dwc3/xhci-hcd.0.auto/usb5/5-1/5-1:1.0/0003:046D:C31C.0002/input/input4
[ 1.640441] dwmmc_rockchip fe2c0000.dwmmc: Successfully tuned phase to 183
[ 1.641252] devfreq fde60000.gpu: Couldn't update frequency transition information.
[ 1.643677] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[ 1.683898] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-xhci-hcd.0.auto-1/input0
[ 1.695068] input: Logitech USB Keyboard Consumer Control as /devices/platform/usbdrd/fcc00000.dwc3/xhci-hcd.0.auto/usb5/5-1/5-1:1.1/0003:046D:C31C.0003/input/input5
[ 1.747479] input: Logitech USB Keyboard System Control as /devices/platform/usbdrd/fcc00000.dwc3/xhci-hcd.0.auto/usb5/5-1/5-1:1.1/0003:046D:C31C.0003/input/input6
[ 1.747924] hid-generic 0003:046D:C31C.0003: input,hiddev97,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-xhci-hcd.0.auto-1/input1
[ 1.932600] ALSA device list:
[ 1.932624] #0: rockchip,hdmi
[ 1.932632] #1: rockchip,i2s1-dummy-codec
[ 1.932640] #2: rockchip,i2s3-dummy-codec
[ 1.932647] #3: ROCKCHIP,SPDIF
[ 2.019540] EXT4-fs (mmcblk2p7): recovery complete
[ 2.019998] EXT4-fs (mmcblk2p7): mounted filesystem with ordered data mode. Opts: (null)
[ 2.020084] VFS: Mounted root (ext4 filesystem) on device 179:7.
[ 2.020987] devtmpfs: mounted
[ 2.024087] Freeing unused kernel memory: 1600K
[ 2.024198] Run /sbin/init as init process
[ 2.092221] EXT4-fs (mmcblk2p7): re-mounted. Opts: (null)
[ 2.488175] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 3.039877] EXT4-fs (mmcblk2p7): re-mounted. Opts: (null)
[ 3.067520] EXT4-fs (mmcblk2p7): re-mounted. Opts: (null)
[ 3.274147] EXT4-fs (mmcblk2p8): mounted filesystem with ordered data mode. Opts: (null)
[ 3.512173] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 3.740193] EXT4-fs (mmcblk2p9): mounted filesystem with ordered data mode. Opts: (null)
[ 4.536160] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.560151] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.872078] udevd[554]: starting version 3.2.7
[ 5.876409] udevd[554]: specified group 'kvm' unknown
[ 5.889077] udevd[555]: starting eudev-3.2.7
[ 5.906414] udevd[555]: specified group 'kvm' unknown
[ 6.113456] dwhdmi-rockchip fe0a0000.hdmi: hdmi plug in
[ 6.286717] dwhdmi-rockchip fe0a0000.hdmi: hdmi plug out
[ 6.352633] [BT_RFKILL]: bt shut off power
[ 6.584159] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 6.835154] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[ 6.858039] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host high!
[ 6.901166] [BT_RFKILL]: ENABLE UART_RTS
[ 6.961907] usb 7-1: New USB device found, idVendor=2207, idProduct=0019, bcdDevice= 3.10
[ 6.961924] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.961931] usb 7-1: Product: AiDance
[ 6.961937] usb 7-1: Manufacturer: Leye
[ 6.961943] usb 7-1: SerialNumber: fe4803249b87822c
[ 6.987434] dwhdmi-rockchip fe0a0000.hdmi: hdmi plug in
[ 7.007328] cdc_acm 7-1:1.0: ttyACM0: USB ACM device
[ 7.008155] [BT_RFKILL]: DISABLE UART_RTS
[ 7.008211] [BT_RFKILL]: bt turn on power
[ 7.008358] [BT_RFKILL]: Request irq for bt wakeup host
[ 7.008397] [BT_RFKILL]: ** disable irq
[ 7.011513] cdc_eem 7-1:1.2 usb0: register 'cdc_eem' at usb-xhci-hcd.1.auto-1, CDC EEM Device, c2:d8:6e:45:a3:0c
[ 7.528587] of_dma_request_slave_channel: dma-names property of node '/serial@fe650000' missing or empty
[ 7.528623] ttyS1 - failed to request DMA, use interrupt mode
[ 7.528949] clk_uart1_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 7.529042] clk_uart1_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 7.529089] clk_uart1_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 7.608167] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 7.620263] dwhdmi-rockchip fe0a0000.hdmi: previous hdmi mode and hardware status dismatch [in(0)-out(0)-->in(100a)-out(100a)], need mode change
[ 7.620591] rockchip-vop2 fe040000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11 for vp0
[ 7.642934] Generic PHY stmmac-1:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[ 7.644315] dwmac4: Master AXI performs any burst length
[ 7.644354] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found
[ 7.644377] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 7.644579] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
[ 7.644987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.661554] IPv6: ADDRCONF(NETDEV_UP): can0: link is not ready
[ 7.676678] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676729] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676745] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676759] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676773] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676788] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676801] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676815] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676829] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.676842] rockchip-vop2 fe040000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.761528] clk_uart1_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 8.000222] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.633155] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 8.696251] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
[ 8.696984] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 8.805089] clk_uart1_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 9.027241] clk_uart1_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 9.656160] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 10.680157] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[ 11.704150] rk-pcie 3c0800000.pcie: PCIe Link Fail
[ 11.704176] rk-pcie 3c0800000.pcie: failed to initialize host
[ 16.161961] of_dma_request_slave_channel: dma-names property of node '/serial@fe670000' missing or empty
[ 16.161994] ttyS3 - failed to request DMA, use interrupt mode
[ 16.162422] clk_uart3_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 16.162551] clk_uart3_frac p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
[ 27.828009] mpp_process_request:1103: unknown mpp ioctl cmd 403
[ 31.736185] vcc3v3_lcd1_n: disabling
[ 31.736218] pcie30_3v3: disabling
[ 34.706784] mpp_process_request:1103: unknown mpp ioctl cmd 403
[ 69.901881] mpp_process_request:1103: unknown mpp ioctl cmd 403
[ 79.138928] mpp_process_request:1103: unknown mpp ioctl cmd 403