在上面我们自己手写了一个众筹案例、接下来对案例做一个调试检查
首先我们实现一个ERC20 TOKEN,代码如下:
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract TokenERC20 {
string public name;
string public symbol;
uint8 public decimals = 18; // decimals 可以有的小数点个数,最小的代币单位。18 是建议的默认值
uint256 public totalSupply;
// 用mapping保存每个地址对应的余额
mapping (address => uint256) public balanceOf;
// 存储对账号的控制
mapping (address => mapping (address => uint256)) public allowance;
// 事件,用来通知客户端交易发生
event Transfer(address indexed from, address indexed to, uint256 value);
// 事件,用来通知客户端代币被消费
event Burn(address indexed from, uint256 value);
/**
* 初始化构造
*/
function TokenERC20(uint256 initialSupply, string tokenName, string tokenSymbol) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // 供应的份额,份额跟最小的代币单位有关,份额 = 币数 * 10 ** decimals。
balanceOf[msg.sender] = totalSupply; // 创建者拥有所有的代币
name = tokenName; // 代币名称
symbol = tokenSymbol; // 代币符号
}
/**
* 代币交易转移的内部实现
*/
function _transfer(address _from, address _to, uint _value) internal {
// 确保目标地址不为0x0,因为0x0地址代表销毁
require(_to != 0x0);
// 检查发送者余额
require(balanceOf[_from] >= _value);
// 确保转移为正数个
require(balanceOf[_to] + _value > balanceOf[_to]);
// 以下用来检查交易,
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// 用assert来检查代码逻辑。
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* 代币交易转移
* 从创建交易者账号发送`_value`个代币到 `_to`账号
*
* @param _to 接收者地址
* @param _value 转移数额
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* 账号之间代币交易转移
* @param _from 发送者地址
* @param _to 接收者地址
* @param _value 转移数额
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* 设置某个地址(合约)可以交易者名义花费的代币数。
*
* 允许发送者`_spender` 花费不多于 `_value` 个代币
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* 设置允许一个地址(合约)以交易者名义可最多花费的代币数。
*
* @param _spender 被授权的地址(合约)
* @param _value 最大可花费代币数
* @param _extraData 发送给合约的附加数据
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* 销毁创建者账户中指定个代币
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* 销毁用户账户中指定个代币
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
}
接下来我们先部署这个合约,该合约我们可以自己传入发行量、代币名称和符号,这个的具体细节在前面已经讲到,不再赘述。
合约部署完成后自己在MetaMask上添加TOKEN
然后部署我们的众筹合约,首先我们看看前面讲的参数:
- ifSuccessfulSendTo: 募资成功后的收款方(其实这里可以默认为合约创建者)
- fundingGoalInEthers:募资额度, 为了方便我们仅募3个ether
- durationInMinutes: 募资时间
- finneyCostOfEachToken: 每个代币的价格
- addressOfTokenUsedAsReward: 代币合约地址。
看看合约部署界面
传入参数后点击”create”,部署合约
接下来我们需要等待确认完成
这样,我们的众筹合约部署就完成了,然后我们可以通过给收款方转以太币来买入众筹方所发的TOKEN
先打开钱包网站:myetherwallet.com
然后开始交易
发送交易
上面就是我们的众筹合约相关部署实例了。