LVS DR模式配置
  LZgegZagYcYq 2023年11月02日 47 0

 LVS+Keepalived配置:

LVS使用两个网卡,网卡一对外提供服务(VIP也位于该网卡),网卡二连接后端RealServer(网卡二和RealServer位于同一网段)

RealServer需要配置回环网卡,如下:

CentOS:

ifconfig lo:0 10.10.20.21 netmask 255.255.255.255 up   #10.10.20.21为VIP

Windows:

添加硬件 - 回环网卡,取消IPv6
运行如下命令:

netsh interface ipv4 set interface "Loopback" weakhostreceive=enabled
netsh interface ipv4 set interface "Loopback" weakhostsend=enabled
netsh interface ipv4 set interface "Business" weakhostreceive=enabled
netsh interface ipv4 set interface "Business" weakhostsend=enabled

Keepalived.conf配置如下:

! Configuration File for keepalived

global_defs {
router_id LVS_001
}

vrrp_instance LVI_1 {
state MASTER
interface eth0
virtual_router_id 59
priority 100
advert_int 2
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
10.10.20.21
}
}

virtual_server 10.10.20.21 443 {
delay_loop 6
lb_algo lc
lb_kind DR
#net_mask 255.255.255.0
persistence_timeout 120
protocol TCP
real_server 10.10.21.27 443 {
weight 10
TCP_CHECK {
connect_port 443
connect_timeout 3
#nb_get_retry 3
#delay_before_retry 3
}
}
}

 

【版权声明】本文内容来自摩杜云社区用户原创、第三方投稿、转载,内容版权归原作者所有。本网站的目的在于传递更多信息,不拥有版权,亦不承担相应法律责任。如果您发现本社区中有涉嫌抄袭的内容,欢迎发送邮件进行举报,并提供相关证据,一经查实,本社区将立刻删除涉嫌侵权内容,举报邮箱: cloudbbs@moduyun.com

  1. 分享:
最后一次编辑于 2023年11月08日 0

暂无评论

推荐阅读
LZgegZagYcYq